Quick Start Guide

A Quick Guide to Getting Started
FAQs
How is a condensation dryer different than a traditional dryer?
Condensation dryers are more energy efficient than traditional
vented dryers as they recirculate the air preventing heat loss. This
process usually causes them to take longer to dry clothes.
How do I change a setting after a cycle has begun?
Turn the knob to the reset position (12 o’clock) OR press the
power button to turn off the dryer and cancel the cycle. Press
the power button to turn the dryer on again, select the new
setting, then press start/pause to start the cycle. Changing a cycle selection without canceling the
current cycle will not change the cycle selection.
Is it normal for my dryer to make sounds or noises?
Some sounds are part of your dryers normal operations. You may hear the suspension rollers or air
exchange system moving air through the cycle. You may also hear the pump which extracts the condensed
water from the unit. Check your Use & Care Manual to learn more.
Before you begin
Check that all shipping materials are removed and ensure the
dryer is level, side-to-side and front-to-back; sitting evenly on
all corners.
Refer to your Installation
Instructions for more tips.
Do the following after every load
to ensure the best function of your
dryer:
» Clean the lint filter.
» Empty the water container.
If the direct drain kit is installed, the
water container does not need to
be emptied. See the Use & Care
Manual for more information.
Occasionally clean the condenser. Follow the instructions in the
Use & Care Manual for more details.
136962570
(August 2020)
Care and cleaning
Better living means combining thoughtful compact design
with technology that uses less heat to be gentler on your
clothes.
The power button also cancels a
selected cycle.
We Recommend:
Always make sure the water container
is in place and empty before starting
a load.
For more information and FAQs, visit electroluxappliances.com

Summary of content (2 pages)