Installation Guide

13
Reversing Door
11
1
2
3
4
5
6
7
8
9
10
11
12
10 Rotate inner lens 180° and place back into door
assembly.
11 Reinstall inner door ring with 12 screws removed earlier.
12 Gently pry the plastic latch cover from the front panel
and set it aside. Remove the 3 screws securing the door
latch and release the latch.
13 Rotate the latch 180° and reinstall it in the opposite
location.
14 Rotate the plastic latch cover 180° and snap it in place
around the door latch.
15 While supporting the door, install the 2 hinge mounting
screws removed in first step. Attach the upper screw first
and then the lower one.
16 Close the door and test operation of hinge, strike and
latch.
180
2
1
3
3
1
2
180
180
12