Installation Instructions

17
30” DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
Wall and floor attachment
Positioning the bracket using the template:
1. Choose the correct side of the template, based
on the model.
2. Fold the template following the horizontal dashed
line.
3. Place the template so that the thick vertical line
drawn on it is aligned with the edge of the left
side of the appliance.
4. Mark the location of the screw holes, to wall or to
floor depending of how you want to fix the
bracket.
5. Fix the anti-tip bracket.
WARNING
Electrical shock hazard
• Use extreme caution when
drilling holes in the wall or
floor. There may be con-
cealed electrical wiring
behind the wall or under the
floor.
• Identify the location of the
electrical circuits that could
be affected by the installation
of the anti-tip device, then
turn off power to these cir-
cuits.
• Failure to follow these
instructions may result in
electrical shock or other per-
sonal injury.
CAUTION
• Contact a qualified installer
or contractor to determine
the proper method for drilling
holes through the wall or
floor material (such as
ceramic tile, hardwood, etc.)
• Failure to follow these
instructions may result in
damage to wall or floor cov-
erings.
WARNING
Visually check from the inside
of the drawer that the wall/
floor-mounted bracket is
inserted into the appropriate
lateral hook (left side).