EBGL40CN EBGL40SP EN OVEN USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 6 4. CONTROL PANEL............................................................................................... 7 5. BEFORE FIRST USE....................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • Before carrying out any maintenance, disconnect the appliance from the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
ENGLISH • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre. • Do not let mains cables touch or come near the appliance door, especially when the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. • Connect the mains plug to the mains socket only at the end of the installation.
www.electrolux.com furniture panel until the appliance has cooled down completely after use. 2.4 Care and cleaning WARNING! Risk of injury, fire, or damage to the appliance. 2.5 Internal light • The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting. WARNING! Risk of electrical shock. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold.
ENGLISH 3.2 Accessories To bake and roast or as a pan to collect fat. Wire shelf Food Sensor For cookware, cake tins, roasts. To measure the temperature inside the food. Baking tray For cakes and biscuits. Grill- / Roasting pan 4. CONTROL PANEL 4.
www.electrolux.com Use the sensor fields to operate the appliance. Sensor Field - 1 2 3 4 5 Function Description DISPLAY Shows the current settings of the appliance. ON / OFF To activate and deactivate the appliance. Use it to access the oven functions. OPTIONS To set an oven function or an automatic programme. MY FAVOURITE PROGRAMME To store your favourite programme. Use it to have access to your favourite programme directly or when the appliance is deactivated.
ENGLISH 9 Other indicators of the display: Symbol / Name Description Automatic programme You can choose an automatic programme. My favourite programme The favourite programme operates. g An automatic programme with a weight input operates. h / min A clock function operates. Temperature / Fast heat up The function operates. Temperature The current temperature is indicated. Core temperature sensor The core temperature sensor is in the core temperature sensor socket.
www.electrolux.com 6.2 Oven functions Oven function Application True Fan Cooking To bake on up to three shelf positions at the same time and to dry food. Set the temperature 20 - 40 °C lower than for Top / Bottom Heat. Pizza Setting To bake food on one shelf position for a more intensive browning and a crispy bottom. Set the temperature 20 - 40 °C lower than for Top / Bottom Heat. Conventional Cooking (Top / Bottom Heat) To bake and roast food on one shelf position.
ENGLISH 6.5 Checking the temperature You can see the temperature in the appliance when the function or programme operates. 1. Touch . The Temperature / Time display shows the temperature in the appliance. 2. Touch to go back to the set temperature or the display shows it automatically after five seconds. 6.6 Fast heat up function The Fast heat up function is not available with every oven function.
www.electrolux.com 3. Use or to set the minutes for DURATION time. 6. Touch , the appliance switches to the setting of the END function. or the DURATION time 4. Touch starts automatically after 5 seconds. The display shows flashing 5. Use or to set the hours for DURATION time. 6. Touch . The DURATION time starts automatically after 5 seconds. When the set time ends, an acoustic and time signal sounds for 2 minutes. setting flash in the display. The appliance deactivates. 7.
ENGLISH 8.1 Automatic programmes 1. Activate the appliance. 2. Touch . The display shows the number of the automatic programme (1 – 9). or to choose the 3. Touch automatic programme. 4. Touch or wait five seconds until the appliance automatically starts to work. 5. When the set time ends, an acoustic signal sounds for two minutes. The flashes. symbol 6. Touch a sensor field to stop the acoustic signal. 7. Deactivate the appliance. 8.2 Automatic programmes with weight input 13 1. Activate the appliance.
www.electrolux.com When you put the core temperature sensor into the socket, you cancel the settings for the clock functions. 4. Touch or temperature. to set the core or the settings save 5. Touch automatically after 5 seconds. You can set the core temperature only when flashes. If is in the display but does not flash before you set the core temperature, touch and or to set a new value. 6. Set the oven function and the oven temperature.
ENGLISH Push the baking tray / deep pan between the guide bars of the shelf support and the wire shelf on the guide bars above. 15 Small indentation at the top increase safety. The indentations are also anti-tip devices. The high rim around the shelf prevents cookware from slipping of the shelf. 10. ADDITIONAL FUNCTIONS 10.1 Using My Favourite Programme function SAFE comes on in the display. To deactivate the Child Lock function repeat step 2.
www.electrolux.com Description Value to set 1 RESIDUAL HEAT INDICATOR ON / OFF 2 KEY TONE1) CLICK / BEEP / OFF 3 FAULTY TONE ON / OFF 4 BRIGHTNESS LOW / MEDIUM / HIGH 5 SERVICE MENU - 6 RESTORE SETTINGS YES / NO 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. When the appliance is turned off, 10.6 Brightness of the display touch and hold for three seconds. The display shows SET1 and "1" flashes. There are two modes of display brightness: 2.
ENGLISH 17 11. CARE AND CLEANING WARNING! Refer to Safety chapters. 11.1 Notes on cleaning • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. • To clean metal surfaces, use a dedicated cleaning agent. • Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. The risk is higher for the grill pan. • Clean stubborn dirt with a special oven cleaner. • Clean all accessories after each use and let them dry.
www.electrolux.com WARNING! Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully press the clamping levers (A) on the two door hinges. WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker. The top lamp A A 1. Turn the lamp glass cover counterclockwise to remove it. 3.
ENGLISH 19 12. TROUBLESHOOTING WARNING! Refer to Safety chapters. 12.1 What to do if... Problem Possible cause Remedy You cannot activate or operate the oven. The oven is not connected to an electrical supply or it is connected incorrectly. Check if the oven is correctly connected to the electrical supply (refer to the connection diagram if available). The oven does not heat up. The oven is deactivated. Activate the oven. The oven does not heat up. The clock is not set. Set the clock.
www.electrolux.com Problem Possible cause Remedy The display shows "C2". You want to start the Defrost function, but you did not remove the core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows an error code that is not in this table. There is an electrical fault. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again.
ENGLISH 21 min. 3 mm 13.2 Building in During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2. Push the appliance into the recess. A = appliance, N = recess B 180 mm A A ~50 mm A A 595 N mm 585-592 mm 442 mm 115 mm 20 mm N min.
www.electrolux.com min. 20 mm A A B 10 mm 20 mm 13.3 Installing the oven under a work surface Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Place the appliance in front of the recess and connect the mains plug.
ENGLISH 23 1 = 45 mm 2 = 45 mm 3 = 60 mm 4 = 60 mm 2 = 70 mm 1 2 3 4 1 3 4 14. ENERGY EFFICIENCY 14.1 Product Fiche and information according to EU 65-66/2014 Supplier's name Electrolux Model identification EBGL40CN EBGL40SP Energy Efficiency Index 103.
www.electrolux.com Energy efficiency class A Energy consumption with a standard load, conventional mode 0.99 kWh/cycle Energy consumption with a standard load, fanforced mode 0.88 kWh/cycle Number of cavities 1 Heat source Electricity Volume 71 l Type of oven Built-In Oven Mass EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance. 14.
ENGLISH 15. CH 25 GUARANTEE Customer Service Centres Point of Service Industriestrasse 10 5506 Mägenwil Le Trési 6 1028 Préverenges Via Violino 11 6928 Manno Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke Schlossstrasse 1 4133 Pratteln Comercialstrasse 19 7000 Chur Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111 Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel.
www.electrolux.
ENGLISH 27
867314706-C-132017 www.electrolux.