User Manual

Problem Possible cause Remedy
Hob²Hood modes H1 - H6
operate, but the light is off.
There might be a problem
with the light bulb.
Contact an Authorised
Service Centre.
There is no sound when
you touch the panel sensor
fields.
The sounds are deactiva‐
ted.
Activate the sounds. Refer
to "Daily use".
Wrong language is set. You changed the language
by mistake.
Reset all functions to the
factory settings. Select Re‐
set All Settings from the
Menu.
Disconnect the hob from
the electrical supply. After
1 min, connect the hob
again. Set Language, Dis‐
play Brightness and Buz‐
zer Volume.
A cooking zone deacti‐
vates.
A warning message saying
the cooking zone is going
to switch off comes on.
Automatic Switch Off deac‐
tivates the cooking zone.
Refer to "Daily use".
Deactivate the hob and ac‐
tivate it again.
and a message come
on.
Lock operates. Refer to "Daily use".
O - X - A appears. Child Lock operates. Refer to "Daily use".
blinks.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is unsuita‐
ble.
Use suitable cookware.
Refer to "Hints and tips".
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions. Refer to
"Technical data".
and a number come on.
There is an error in the
hob.
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on
again, disconnect the hob
from the electrical supply.
After 30 seconds, connect
the hob again. If the prob‐
lem continues, speak to an
Authorised Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
www.electrolux.com22