User Manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. INSTALLATION
- 4. PRODUCT DESCRIPTION
- 5. QUICK GUIDE
- 6. BEFORE FIRST USE
- 7. DAILY USE
- 7.1 Activating and deactivating
- 7.2 Automatic Switch Off
- 7.3 Using the cooking zones
- 7.4 Heat setting
- 7.5 PowerBoost
- 7.6 Power limitation
- 7.7 Power Management
- 7.8 Bridge function
- 7.9 Timer
- 7.10 Pause
- 7.11 Lock
- 7.12 Child Lock
- 7.13 Language
- 7.14 Key Tones / Buzzer Volume
- 7.15 Display Brightness
- 7.16 Assisted Cooking
- 7.17 Melting
- 7.18 Hob²Hood
- 8. HINTS AND TIPS
- 9. CARE AND CLEANING
- 10. TROUBLESHOOTING
- 11. TECHNICAL DATA
- 12. ENERGY EFFICIENCY
- 목차
- 1. 안전 정보
- 2. 안전 지침
- 3. 설치
- 4. 제품 설명
- 5. 빠른 가이드
- 6. 처음 사용하기 전에
- 7. 일상적 사용
- 8. 유용한 정보
- 9. 관리 및 청소
- 10. 문제 해결
- 11. 기술 정보
- 12. 에너지 효율성
Keep the window of the
Hob²Hood infrared signal
communicator clean.
Other remotely controlled
appliances may block the
signal. Do not use any such
appliances near to the hob
while Hob²Hood is on.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
consumer website. The Electrolux cooker
hoods that work with this function must
have the symbol .
9. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
9.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.
9.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the
glass surface at an acute angle and
move the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
• The surface of the hob has horizontal
grooves. Clean the hob with a moist
cloth and some detergent with smooth
movement from left to right. After
cleaning, wipe the hob dry with a soft
cloth from left to right.
10. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
10.1 What to do if...
Problem Possible cause Remedy
You cannot activate or op‐
erate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
The fuse is blown. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
www.electrolux.com20