User Manual

You can also change the heat setting
while cooking. Touch the zone selection
symbol on the main view of the control
panel and move you finger to the left or
right (to lower or increase the heat
setting).
7.5 PowerBoost
This function activates more power for
the appropriate induction cooking zone; it
depends on the cookware size. The
function can be activated only for a
limited period of time.
1. Touch the desired zone symbol first.
2. Touch or slide your finger to the
right to activate the function for the
chosen cooking zone.
The symbol turns red and becomes
bigger.
The function deactivates automatically.
To deactivate the function manually
select the zone and change its heat
setting.
For maximum duration
values, refer to "Technical
data".
7.6 Power limitation
Originally the appliance works at the
highest possible power level. You can
change the maximum power if the
installation does not support the full
power.
Make sure that the selected
power fits to the house
installation fuses.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Power
Management and choose the
appropriate power level.
To leave the Menu touch the right side of
the display, outside of the pop-up
window, or touch repeatedly.
7.7 Power Management
• All cooking zones are connected to
one phase. See the illustration.
• The function activates when the total
electricity loading of the cooking
zones exceeds the maximum
electricity loading of the phase.
• The function activates as well when
the electricity loading of a pair of
zones (left or right) exceeds 3600 W.
• The function divides the power
between cooking zones.
• The function limits the power of the
other cooking zones, which has an
influence on the available heat
setting.
• The maximum heat setting is visible
on the slider. Only the digits in white
are active.
• If a higher heat setting is not
available, reduce it for the other
cooking zones first.
Power Management with Power
limitation function
When you set the Power limitation
function, the power of the hob is divided
between all cooking zones.
7.8 Bridge function
This function connects two cooking
zones and they operate as one with the
same heat setting.
You can use the function with large
cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
2. Touch to activate the function.
The zone symbol changes.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
ENGLISH 13