32963770_en.qxd 21/07/2008 8.
132963770_en.qxd 21/07/2008 8.25 Page 2 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
132963770_en.qxd 21/07/2008 8.
132963770_en.qxd 4 21/07/2008 8.
132963770_en.qxd 21/07/2008 8.
132963770_en.qxd 6 21/07/2008 8.25 Page 6 Safety information Instruction booklet Safety information Prior to using for the first time • The safety of AEG/ELECTROLUX appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. You MUST read them carefully before installing or using the appliance.
132963770_en.qxd 21/07/2008 8.25 Page 7 Safety information 7 • Do not use your washing machine to wash articles with whalebones, material without hems or torn material. • Always unplug the appliance and turn off the water supply after use, cleaning and maintenance. • Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
132963770_en.qxd 8 21/07/2008 8.25 Page 8 Safety information Use • This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. • Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. • Do not overload the appliance. See the relevant section in the user manual. • Before washing, ensure that all pockets are empty and buttons and zips are fastened.
132963770_en.qxd 21/07/2008 8.25 Page 9 Product description 9 Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. 1 2 3 Detergent dispenser drawer Control panel Door opening handle 4 5 6 Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for prewash phase or stain remover . The prewash detergent is added at the beginning of the wash programme.
132963770_en.qxd 21/07/2008 8.
132963770_en.qxd 21/07/2008 8.25 Page 11 Control panel 11 Display (7) 7.2 7.3 7.1 7.1 Duration of selected programme : After selecting a programme, the duration is displayed in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
132963770_en.qxd 12 21/07/2008 8.25 Page 12 Control panel Indicator pilot lights (10) After having pressed the button 8, the WASHING pilot light (10.1) comes on. When the pilot light 10.1 comes on this means that the machine is operating. 10.1 The DOOR pilot light (10.2) indicates if the door can be opened: 10.2 ● light on: the door cannot be opened. 10.3 ● light blinking: the door is opening. ● light off: the door can be opened.
2963770_en.qxd 21/07/2008 8.25 Page 13 Use 13 First Use Ensure that the electrical and water connections comply with the installation instructions. Remove the polystyrene block and any material from the drum. Run a cotton cycle at 90° or 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
132963770_en.qxd 14 21/07/2008 8.25 Page 14 Use Daily Use Load the laundry 1. Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 2. Close the door firmly. You must hear a click during closing. Attention! Please ensure that laundry items do not get embedded between the door and the rubber gasket.
132963770_en.qxd 21/07/2008 8.25 Page 15 Use 15 Select the required programme by means of programme selector dial (1) The machine is now switched on. You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»). Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g.
132963770_en.qxd 16 21/07/2008 8.25 Page 16 Use Programme option button Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the button 8. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
132963770_en.qxd 21/07/2008 8.25 Page 17 Use 17 Select the TIME option (Button 6) This option allows you to modify the washing time, automatically proposed by the washing machine. DAILY: by pressing this button once, the relative pilot light comes on and the washing duration will be reduced to wash daily soiled laundry.
132963770_en.qxd 18 21/07/2008 8.25 Page 18 Use Selecting the delayed start. ● Select the programme and the required options. ● Select the delay start. ● Depress button 8: the machine starts its hourly countdown. The programme will start after the selected delay has expired. Cancelling the delayed start ● set the washing machine to PAUSE by pressing the button 8; ● press button 9 once until the symbol 0’ is displayed; ● press the button 8 again to start the programme.
132963770_en.qxd 21/07/2008 8.25 Page 19 Use 19 Cancelling a programme Turn the selector dial to O to cancel a programme which is running. You can now select a new programme. Opening the door after the programme has started First set the machine to pause by pressing the button 8. If the pilot light 10.2 blinks some minutes and then goes off, the door can be opened. If the DOOR remains locked the pilot light 10.2 is on, this means that the machine is already heating, that the water level is too high.
132963770_en.qxd 20 21/07/2008 8.
132963770_en.qxd 21/07/2008 8.25 Page 21 Washing programmes 21 Washing programmes Programme/ Temperature DELICATE RINSES Type of laundry Separate rinse cycle for hand washed items DRAIN For emptying out the last rinse water in programmes with the Rinse Hold option SPIN Separate spin for cotton fabric REFRESH 30° Options SPIN, RINSE HOLD, EXTRA RINSE Description of programme Rinses Short spin Max. load kg 6 Draining of water Max. load kg 6 SPIN Drain and long spin Max.
132963770_en.qxd 22 21/07/2008 8.25 Page 22 Programme information Programme information EASY IRON By selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses. WOOL PLUS HANDWASH Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol .
132963770_en.qxd 21/07/2008 8.25 Page 23 Preparing the wash cycle 23 Preparing the wash cycle Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 95° or 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...). 60°/ 50° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas.
132963770_en.qxd 24 21/07/2008 8.25 Page 24 Preparing the wash cycle Maximum loads Recommended loads are indicated in the washing programme charts. General rules: Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full; Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size.
132963770_en.qxd 21/07/2008 8.25 Page 25 Preparing the wash cycle 25 Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint:: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
132963770_en.qxd 26 21/07/2008 8.25 Page 26 Preparing the wash cycle • powder detergents for delicate fabrics (60°C max) and woollens, • liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme.
132963770_en.qxd 21/07/2008 8.25 Page 27 Care and cleaning 27 Care and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
132963770_en.qxd 28 21/07/2008 8.25 Page 28 Care and cleaning 2. To aid cleaning, the top part of the additive compartment should be removed. 3. Flush it out under a tap, to remove any traces of accumulated powder. 4. Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. 5. Replace the drawer and run the rinse programme without any clothes in the drum. 6.
132963770_en.qxd 21/07/2008 8.25 Page 29 Care and cleaning 29 Drain pump The pump should be inspected regularly and particularly if • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled down. A 3. Place a container close to the pump (A) B to collect any spillage. 4.
132963770_en.qxd 30 21/07/2008 8.25 Page 30 Care and cleaning replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it. Water inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. 1. Turn off the water tap. 2. Unscrew the hose from the tap. 3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap.
132963770_en.qxd 21/07/2008 8.25 Page 31 Care and cleaning 31 Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: 1. Close the water tap and unscrew the water inlet hose from the tap. 2. Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. 3. Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.
132963770_en.qxd 32 21/07/2008 8.25 Page 32 What to do if... What to do if... Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
132963770_en.qxd 21/07/2008 8.25 Page 33 What to do if... Problem The machine fills then empties immediately: The machine does not empty and/or does not spin: 33 Possible cause/Solution The end of the drain hose is too low. • Refer to relevant paragraph in «water drainage» section. The drain hose is squashed or kinked. E20 • Check the drain hose connection. The drain filter is clogged. E20 • Clean the drain filter.
132963770_en.qxd 34 21/07/2008 8.25 Page 34 What to do if... Problem The door will not open: The machine vibrates or is noisy: Cause possible/Solution The programme is still running. • Wait until the end of washing cycle. The door lock has not been released. • Wait until the pilot light DOOR has gone off. There is water in the drum. • Select drain or spin programme to empty out the water. The transit bolts and packing have not been removed. • Check the correct installation of the appliance.
132963770_en.qxd 21/07/2008 8.
132963770_en.qxd 36 21/07/2008 8.25 Page 36 Installation Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom. HEC0008 2.
132963770_en.qxd 21/07/2008 8.25 Page 37 Installation 37 4. Unscrew and remove the two large rear bolts B and the six smaller bolts C. C C B D B 5. Remove the bracket D and refit the six smaller bolts C. Slide out the relevant plastic spacer E. E C 6. Open the porthole, take out the inlet hose from the drum. C 7. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. 8.
132963770_en.qxd 38 21/07/2008 8.25 Page 38 Installation Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.
132963770_en.qxd 21/07/2008 8.25 Page 39 Installation 39 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Installation should comply with local water authority and building regulations requirements. A minimum water pressure of 0.05 MPa is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.
132963770_en.qxd 8.25 Page 40 Installation 3 pin Min.60 cm. (23.6") When discharging into a standpipe ensure that the top of the standpipe is no more than 90 cm (35.4'') and no less than 60 cm (23.6'') above floor level. The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18 mm. Max. 90 cm. (35.
132963770_en.qxd 21/07/2008 8.25 Page 41 Installation 41 In the interest of the environment Washing machines should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.
132963770_en.qxd 42 21/07/2008 8.25 Page 42 Installation If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows: Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol or coloured green and yellow.
132963770_en.qxd 21/07/2008 8.25 Page 43 Installation Building-in 43 600 600 596 in. 600 m 120 416 818 176, 5 515 820 min This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. 160 195 541 8 90 0 49 165 A When installing the appliance into the kitchen furniture ensure, if possible, the hoses are placed in either of the two recesses on the back of the appliance.
132963770_en.qxd 44 21/07/2008 8.25 Page 44 Installation c) Mounting the door Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges can be adjusted to compensate for possible uneven thickness of the door. To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again. d) Counter-magnet (6) The appliance is pre-arranged for a magnetic closure of the door.
132963770_en.qxd 21/07/2008 8.25 Page 45 Installation 45 Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow. The reason for placing the base in this position is to allow a small strip of beading to be fitted in front of the appliance feet. Fix the base firmly to the floor using four appropriate countersunk screws (see Fig. H).
132963770_en.qxd 46 21/07/2008 8.25 Page 46 Environment concerns Environment concerns Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Old machine Use authorised disposal sites for your old appliance.
132963770_en.qxd 21/07/2008 8.
132963770_en.qxd 21/07/2008 8.25 Page 48 www.electrolux.com 132 963 770-01-302008 Subject to change without notice www.aeg-electrolux.co.
