Installation guide

Guides to Install Stacking Kit (for Condenser Dryer EDC/EDP Series)

1) Unpack the stacking kit.

2) Remove 4pcs of legs of dryer.

3) Put stacking kit into the base of dryer & fasten the screws as shown in the diagram below.

Note: Screws come together with stacking kit.

PAGE 1
Guides to Install Stacking Kit (for Condenser Dryer EDC/EDP Series) 1) Unpack the stacking kit. 2) Remove 4pcs of legs of dryer. 3) Put stacking kit into the base of dryer & fasten the screws as shown in the diagram below. Note: Screws come together with stacking kit.
PAGE 2
Guides to Install Stacking Kit (for Venting Dryer EDV series) 1) Unpack the stacking kit. 2) Remove 4pcs of legs of dryer. 3) Put stacking kit into the base of dryer & fasten the screws as shown in the diagram below. Note: Screws come together with stacking kit.