Owner's Guide
9
SurfaceCooking
PLACEMENT OF BURNER HEADS AND CAPS
LOCATIONS OF THE BURNERS
The30”cooktopisequippedwithdifferentsizedburners.
The surface burners are located on the cooktop as follows (See
Figure):
- a 5000BTU(natural gas) burner located at the right rear position;
- a 18 000 BTU (natural gas) burner located at the center rear
position;
- two 9500BTU(natural gas) burners located at the left positions;
- and a 12 000 BTU (natural gas) burner located at the right front
position.
30”cooktop
Forthe18000BTUburner:
Placetheburnerheadoverthegasorice(Figure1).Becarefulnottodamagetheelectrode
whileplacingtheburnerheadovertheorice.Makesureelectrodetscorrectlyintoslot
in burner head.
Forallburners:
Figure 1
Place a burner cap on each burner head (see
Figure2),matchingthecapsizetothehead
size.Thecapforeachburnerhasaninner
locating ring which centers the cap correctly
on the burner head. Be sure that all the burner
caps and burner heads are correctly placed
BEFORE using your appliance.
Make sure each burner cap is properly aligned
and level.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.
Figure 2
Burner
Head
BurnerCap
Gas
opening
OFF
OFF OFF
OFFOFF
Burner
Cap
Burner
Head