EAAC475 / EAAC475W USER MANUAL USB Charging Alarm Clock Radio with Time Projection PM AM FM Thank you for your purchase of this Electrohome product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference. www.electrohome.
WARNINGS WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. NEED HELP? RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE, REFER TO QUALIFIED USER PERSONNEL.
IMPORTANT SAFETY INFORMATION 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
IMPORTANT SAFETY INFORMATION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WHAT’S INCLUDED • • USB Charging Alarm Clock Radio Quick Start Guide • • PRODUCT INFORMATION Instructional Manual 1 x 3V, CR2032 Flat Lithium battery FRONT BUTTONS When set to ON, LED screen shows TIME, YEAR, MONTH/DAY & current temperature PRODUCT INFORMATION FRONT - LED SCREEN 4 2 3 Turns POWER ON/OFF 5 10:10 1 Increases volume Decreases volume 6 REAR PANEL 7 3 8 1 2 1 LED dot appears to the right of PM indicating time is set to PM 2 LED dot appears to the right of 3 Alarm 1 - LED d
PRODUCT INFORMATION PRODUCT INFORMATION BOTTOM TOP BUTTONS AM / FM 1 DIMMER/GRADATEUR Set Radio Presets / Nap function AM / FM Toggle between AM & FM Radio band / Set ALARM 1 2 3 Set ALARM 2 TIME ZONE/ SNOOZE/SLEEP DIMMER 4 Set TIME ZONE / SNOOZE / SLEEP / LED Brightness Set TIME / Y-M-D / 24h-12h Clock ; View Temperature View D-M-Y / Tune-Scan Radio (BACK) Set DST / Tune-Scan RADIO (FORWARD) / Select °C OR °F - 10 - 1 Battery compartment for 1 x 3V, CR2032 Flat Lithium battery 2 AC Adaptor
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS CONNECTING POWER The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature. When power is connected, the clock display will flash '2' which is TIME ZONE 2 (Eastern time) and the default TIME ZONE setting. The correct time will be displayed, unless you are in another time zone. To select TIME ZONE 2 (Eastern time) as your default time zone: • Press ONCE to confirm your selection.
OPERATING INSTRUCTIONS 3. 4. To REACTIVATE DST/Summer Time, press and hold the DST/°C °F button for 3 seconds while the radio is OFF. 'ON' will appear in the display to show that the Automatic DST/Summer Time adjustment is reactivated. The display will return to the clock. • The timing of Automatic DST/Summer Time employed by the unit (see above) is subjected to variations by region and the law in each country/region. In such a case, cancel the Automatic DST/Summer Time adjustment.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS To set ALARM 2, press the button once to view current alarm setting then press and hold the button and alarm time will flash. The settings below will appear in the following order: ALARM DURATION The BUZZER alarm or RADIO alarm will sound for 30 minutes if no key is pressed, then it will stop automatically and resume to the same alarm time on next scheduled day.
OPERATING INSTRUCTIONS CYCLE DISPLAY The CYCLE DISPLAY function displays the TIME, YEAR, MONTH/DAY & CURRENT TEMPERATURE on the front LED panel in sequence. 1. 2. Press and hold the display button on the front of the alarm clock until ‘ON’ appears on the LED panel. Please wait 10 seconds for the cycle to begin. To return to TIME display only, press and hold until ‘OFF’ appears on the LED panel.
TROUBLESHOOTING SPECIFICATIONS Please consult the Troubleshooting chart below before communicating with ELECTROHOME Customer Support.
ELECTROHOME® WARRANTY NOTES ELECTROHOME gives the following express warranty to the original consumer purchaser or gift recipient for this ELECTROHOME product, when shipped in its original container and sold or distributed by ELECTROHOME or by an Authorized ELECTROHOME Dealer: ELECTROHOME warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
GARANTIE ELECTROHOME® ELECTROHOME accorde la garantie expresse suivante à l’acheteur original de cet appareil ELECTROHOME ou à la personne qui l’a reçu en cadeau, pourvu qu’il ait été expédié et vendu ou distribué par ELECTROHOME ou un détaillant ELECTROHOME autorisé dans son emballage original. ELECTROHOME garantit que cet appareil est exempt de tout défaut de matériau et de fabrication dans des conditions d’utilisation et d’entretien normales.
PROBLÈME HORLOGE Heure incorrecte L’alarme ne se déclenche pas Pas d'affichage DÉPANNAGE CAUSE POSSIBLE L’horloge n’est pas réglée Piles sont insérées incorrectement, pas insérées ou épuisées L’alarme n’est pas réglée L’horloge n’est pas réglée L’heure de l’alarme n’est pas réglée Gradateur est réglé en mode veille SOLUTION POSSIBLE Réglez l’horloge Vérifiez les piles Appuyez le bouton pour régler ALARME 1 ; Appuyez le bouton pour régler ALARME 2 Réglez l’horloge Appuyez le bouton gradateur Press Dimm
3. 4. 5. 6. 7. 8. - 29 - UTILISATION Appuyez le bouton ou HA/°C °F pour sélectionner la station de radio désirée. Appuyez le bouton RÉGL / SIESTE ; « P02 » clignotera à l’écran. Utilisez le bouton ou HA/°C °F pour naviguer à la station prédéfini entre poste « P01 à P10 ». Appuyez le bouton RÉGL / SIESTE encore pour confirmer votre sélection. Répétez les étapes 2 à 4 pour régler plus de paramètres prédéfinis.
- 31 - UTILISATION DURÉE DE L’ ALARME La SONNERIE ou la RADIO sonnera pour 30 minutes, si aucune touche n’est actionnée, l’appareil arrêtera automatiquement et reprendra à la même heure de réveil d’après l’horaire préréglé. Pour arrêter ALARME 1 et /ou ALARME 2 lorsqu’il sonne, appuyez sur le bouton ALIMENTATION sur le devant de l’appareil. MINUTERIE SOMMEIL Lorsque l’alarme sonne, appuyez le bouton MIN SOM/SOMNO/GRAD pour arrêter l’alarme pendant 9 minutes. L’alarme reprendra après 9 minutes.
- 32 - - 33 - Pour régler ALARME 2, appuyez le bouton une fois pour voir l’alarme en cours ensuite appuyer et maintenir le bouton et l’heure d’alarme clignotera ; les paramètres ci-dessous seront affichés dans l’ordre suivant: RÉGLER ALARME 1 ET ALARME 2 Pour régler ALARME 1, appuyez le bouton une fois pour voir l’alarme en cours ensuite appuyer et maintenir le bouton et l’heure d’alarme clignotera.
- 35 - UTILISATION INSTALLATION DE LA PILE 1. À l’aide d’un petit tournevis à tête cruciforme, retirez la vis dans le panneau du compartiment à pile sous l’appareil. 2. Enlevez le panneau du compartiment à pile. 3. Retirez/jetez la pile en respectant les consignes de sécurité et remplacez par une nouvelle pile à plat au lithium 3V CR2032. 4. Fermez le compartiment à piles et remettez la vis en place pour sécuriser la pile. • • • • Les piles doivent être installées par un adulte.
- 37 - INFORMATIONS DU PRODUIT - 36 - UTILISATION CONNEXION D’ALIMENTATION Le radio-réveil recharge USB est équippé avec la fonction « SYNCHRONISATION AUTOMATIQUE DE L’HEURE ». Lorsque l’appareil est alimenté, l’affichage de l’horloge clignote « 2 » qui représente le FUSEAU HORAIRE 2 (heure de l’est). C’est le paramètre de fuseau horaire par défaut, donc l’heure exacte s’affiche, sauf si vous demeurez dans un autre fuseau horaire.
- 39 - INFORMATIONS DU PRODUIT BOUTONS AVANT - 38 - INFORMATIONS DU PRODUIT BOUTONS-DESSUS Lorsque l’option est réglé à ON (appuyer et maintenir appuyé), l’écran affiche l’heure, l’année, le mois/jour et la température en séquence AM / FM Augmente le volume DIMMER/GRADATEUR Met l’appareil SOUS TENSION et HORS TENSION Baisse le volume Sauvegarde les stations de radio préréglées / Fonction sieste PANNEAU ARRIÈRE AM / FM 3 1 Basculer entre bandes radio AM et FM / Régler ALARME 1 Régler ALARME 2 F
- 41 - TABLE DES MATIÈRES Besoin d’aide? ................................................................................................................. 2 Avertissements ................................................................................................................ 3 Consignes de sécurité ...................................................................................................... 4 Ce qui est inclus ...............................................................................
- 43 - CONSIGNES DE SÉCURITÉ IMPORTANTES Déclaration de la FCC sur la réglementation Cet appareil est conforme à la partie 15 des règlements de la FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet équipement ne doit pas causer d’interférences nuisibles et (2) cet équipement doit accepter toute interférence reçue, y compris les interférences capables de causer un mauvais fonctionnement.
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. - 45 - CONSIGNES DE SÉCURITÉ IMPORTANTES N’utilisez qu’un linge doux et sec pour le nettoyage. Ne bloquez aucun des orifices de ventilation. Installez l’appareil conformément aux directives du fabricant. N’installez pas l’appareil à proximité d’une source de chaleur telle que radiateur, bouche à air chaud, cuisinière ou autre appareil (y compris les amplificateurs) qui produisent de la chaleur.
ARRÊT BESOIN D’AIDE NE RETOURNEZ PAS CE PRODUIT AU MAGASIN! Veuillez contacter d’abord un représentant du soutien à la clientèle ELECTROHOME® pour toute information supplémentaire sur les caractéristiques du produit, les spécifications ou pour de l’aide avec l’installation. Veuillez nous contacter par l’une des méthodes ci-dessous: Soutien: www.electrohome.com/support Clavardage en ligne: www.electrohome.com Pour plus d’information sur nos produits, visitez www.electrohome.
EAAC475 / EAAC475W GUIDE DE L’UTILISATEUR Radio-réveil recharge USB avec projection de l’heure PM AM FM Merci d’avoir fait l’achat de cet appareil Electrohome®. Veuillez lire ce manuel attentivement avant de faire fonctionner l’appareil pour vous assurer de l’utiliser correctement. Conservez ce manuel dans un endroit sûr afin de pouvoir vous y référer au besoin. www.electrohome.