ECI 6DS Balanced Integrated Amplifier (with integrated DAC and Streamer) Owner's Manual EN ENGLISH
ENG Unpacking the ECI 6DS Immediately upon receipt of the ECI 6DS, inspect the carton for possible damage during shipment. The carton and packaging have been designed to provide the safest possible protection for transport of your integrated amplifier. Unpack the unit carefully. Save all packaging materials for future shipment. The contents of the carton • • • • • • • 1 1 1 1 1 1 2 pc. Electrocompaniet ECI 6DS integrated amplifier. pc. AC main cord. pc. Spare main fuse (located in the fuse drawer). pc.
ENG How to connect your system Please read this page carefully and follow, page 20-21 as reference. Balanced XLR input and operation The balanced mode can only be used if the signal source has a balanced output. Use an XLR interconnect with GND on pin 1, + on pin2, and - on pin 3. To use the balanced input with a source single ended, connect the ECP5XLR in the XLR Single ended RCA input and operation: The left channel is the top row on the rear, marked black.
ENG How to connect your system Please read this page carefully and follow, page 20-21. SPDIF inputs ECI 6DS will accept optical SPDIF sources up to 96 kHz/24bit on inputs TOSLink1 and TOSLink2. Please use a optical TOSLink cable for this connection. Connect coaxial sources up to 192kHz/24bit to inputs COAX1 and COAX2. Please use a coaxial SPDIF cable for this connection.
ENG Navigator window Audio Source Display Text Description CD CD Analog balanced XLR input AUX AUX Analog single-ended RCA input DVD DVD Analog single-ended RCA input HT HT Analog single-ended home theater RCA input COAX 1 COAX1 Coaxial S/PDIF input up to 192 kHz/24 bit COAX 2 COAX2 Coaxial S/PDIF input up to 192 kHz/24 bit TosLink 1 TOSLNK1 Optical S/PDIF input up to 96 kHz/24 bit TosLink 2 TOSLNK2 Optical S/PDIF input up to 96 kHz/24 bit USB USB Asynchronous High Speed USB 2.
ENG Error codes If the ECI 6DS is not working properly, the display will show an error code. The error codes are: Display Error text DC FAULT LEFT DC FAULT RIGHT DC Description DC voltage left channel Please contact service center.
ENG Replacing a blown main fuse The main fuse is located in a small drawer inside the AC inlet of the unit. If, for some reason the fuse is blown, turn the unit off, and remove the AC cord from the AC inlet. Open the drawer with a small screwdriver and remove the blown fuse. The spare fuse is located inside a holder in front of the main fuse. 1. 2. 3. 4. Remove the spare fuse gently by pushing it sideways out of its holder. Insert the spare fuse as the active fuse.
ENG ECT 4 Remote Control Universal Remote Control ECT 4 Unpacking the ECT 4 Remote Control Immediately upon receipt of the ECT 4, inspect the carton for possible damage during shipment. The carton and packaging have been designed to provide the safest possible protection for transport of your remote control. Unpack the unit carefully. Save all packaging materials for future shipment. The contents of the carton • • • • 1 1 1 1 pc. pc. pc. pc. ECT 4 Remote control. Charging docking station. USB cable.
ENG ECT 4 Remote Control Start Pairing To be able to use the ECI 6DS with ECT 4 the two devices have to be paired once. In the pairing process the devices exchange some necessary data like device ID, RF address, etc. After pairing success, ECI 6DS will be added to the device selection screen of the ECT 4 and can be used. Pairing mode has to be started on both ECI 6DS and ECT 4. In addition, ECT 4 and ECI 6DS have to be in close proximity to each other.
ENG ECT 4 Remote Control 1. When pairing is successful press ENTER to select the name of the newly paired device (ECI 6DS). ( image 1 ) 2. Next step, you can select to change the key mapping for the the volume control keys (V+/V-/Mute). This will allow you to remap the volume control keys to a IR device known to ECT 4. Pressing the volume keys will then send volume changes using IR to the selected IR device. Choose "Don't change" to let the volume keys control the volume on ECI 6DS using RF. 3.
ENG ECT 4 Remote Control ECT 4 Remote control 1. Standby - switches ECI 6DS on and off. 2. Four hot keys - controlling the devices shown at the display above each button. ECI 6DS,TV,DVD etc. 3. No function with ECI 6DS. 4. Zone selection - select between zones (Living room, kitchen etc.) 5. Navigate up - a menu list navigator and also browses alphanumeric characters, when renaming devices etc. 6. Settings button - opens the ECT 4 settings menu. 7. Navigate right - similar to ENTER/OK. 8.
ENG ECT 4 Remote Control Operating the ECT 4 When music is playing, the display shows information about the track playing, the time and settings. 5 6 1 7 2 3 4 10:30 ECI 6DS 8 9 Vol: 56 1). Album cover or radio station logo will appear here, if available. 2). Information about music (when available). 3). Indicator for play/pause and elapsed track time/total time. 4). Clock and controlled device 5). Battery indicator. 6). Indicator for repeat function 7). Indicator for shuffle function 8).
ENG ECT 4 Remote Control How to connect to Network and Internet Wired LAN Connection Connect the Ethernet cable to the LAN port at the back panel of ECI 6DS. When turned on, the ECI 6DS will try to establish connection automatically using DHCP. It is also possible to set network options manually. Go to the "Home" menu, scroll to the bottom of the source list, select "Receiver "Settings" and then "Network". Wireless connection (Wi-Fi) To establish the wireless connection please follow the following steps.
ENG ECT 4 Remote Control Play music from a Memory stick 1. Connect your memory stick to the USB port at the rear panel ( image 1). 2. Select "Memory Stick" from the "Home" menu. 3. Choose the music by Artist, Album, Title or other options displayed. 4. Press the button "Play" or "Enter" when a wanted track is highlighted. 5. After a small delay the current playing music will appear on the display. Use the "play", "stop"," "forward", "back" and "pause" buttons to control the music playback.
ENG ECT 4 Remote Control Settings menu Press the "Settings" button to open the system settings menu. Under this menu there is five submenus: 1. Device selection 2. Change Zone 3. System Information 4. User-Settings 5. Start Pairing User settings menu Under the User settings menu you will find the following settings: Name - select and press Enter, to change the name of the remote control. Time - select and press Enter, to change the time.
ENG Updating software and programming the ECT 4 ECT 4 is a universal remote control that also are able to control other IR devices. To setup, please download and install the "Remote Configtool" program. The installation file is available on our website at the "Downloads - Firmware" area. Once the configuration program is installed please follow the following steps: image 1 1. Connect your ECT 4 to a PC or laptop using the USB cable. Don't use the docking TV ECI 6 station.
ENG Technical specifications ECI 6DS: The following technical data were measured on randomized test objects and are typical data. All measurements are made at 120V / 240V // 50Hz / 60Hz. Clipping point of the amplifier is set to a level where total harmonic distortion (THD) is 0.2 %. Preamplifier section Input impedance (Balanced input)....................................... 47 kOhm Noise floor (1Vrms, 20 - 20 kHz, balanced)....................... < -135 dB THD + N (1Vrms, 20 - 20 kHz, balanced) ..........
ENG ECI 6DS Front panel illustration 18
1. Optical digital input, TOSLink 1 2. RS 232 connection 3. USB audio input 4. Coaxial digital input 1 5. 12 V trigger input 6. Coaxial digital input 2 7. 12 V trigger output 8. Optical digital input 2, TOSLink 2 9. Balanced analog right CD input 10. Balanced analog left CD input 11. DVD analog inputs 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
INPUT IN OUT TRIGGER COAX 1 COAX 2 TOSLINK DIGITAL CD player RS-232 USB USB LAN CD-R DVD / Blu-ray player CD-L DVD ANALOG INPUT AUX HT WLAN RIGHT PREAMP OUT LEFT TYPE : ECI 6 Made in Norway Manufactured by: Electrocompaniet Norway RIGHT SPEAKER OUTPUT LEFT AV-Receiver ENG How to connect the system (Analog Inputs)
Media Player 21 RS-232 USB INPUT IN OUT TRIGGER COAX 1 COAX 2 TOSLINK 2 DIGITAL LAN CD-R CD-L DVD ANALOG INPUT Ethernet Hub Gaming console TOSLINK 1 USB Memory Stick AUX RIGHT LEFT TYPE : ECI 6 Made in Norway PREAMP OUT PC / MAC HT WLAN Manufactured by: Electrocompaniet Norway RIGHT SPEAKER OUTPUT LEFT ENG How to connect the system (Digital Inputs)
ENG Important Notice For optimal sonic performance, the ECI 6DS should be burned in for a minimum time of 72 hours. The easiest way to burn in your ECI 6DS is to put a signal at any input, without the speakers connected In daily operation, switch off the ECI 6DS by using the MUTE button on the remote control. If the ECI 6DS has been switched off, allow two hours of warm-up to optimal sonic performance. Due to high class A operation in all Electrocompaniet designs, it is normal for the ECI 6DS to feel warm.
ENG 23
ENG DEALER Sticker HERE LOCAL DEALER Warning! To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture. Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personal. The warranty is void if the product is tampered with by non-authorised personnel. Use only authorized Electrocompaniet service center. Made in Norway www.electrocompaniet.