Sx/Sb-Series 12” Systems Rigging Manual Sx-Series Sb-Series Electro-Voice® Sx/Sb-Series 12” Systems Rigging Manual
WARNING: Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of rigging objects overhead. Electro-Voice strongly recommends that the Sx/Sb-Series enclosures be suspended taking into account all current national, federal, state and local regulations. It is the responsibility of the installer to ensure the loudspeaker is safely installed and in compliance with all regulations.
Figure 1: Overhead Suspension Using the Mb100 Eyebolt Attachment Kit Figure 2c: Horizontal Overhead Suspension Using the Mb200 Installation Kit Figure 2a: Wall Mounting Using the Mb200 Installation Kit Figure 3: Vertical Array Using the Mb200 Installation Kit Figure 2b: Vertical Overhead Suspension Using the Mb200 Installation Kit Electro-Voice® Sx/Sb-Series 12” Systems Rigging Manual 2
Figure 4a: Brackets from One Mb300 Horizontal Array Kit and Two Mb200 Installation Kits, Positioned for Assembly Figure 4b: Assembled Horizontal Array Mounting Frame Consisting of One Mb300 Horizontal Array Kit and Two Mb200 Installation Kits Figure 4c: Two Enclosure Horizontal Array Using the Mb300 Horizontal Array Kit Figure 4d: Orientation for Full Circle (360°) Array Using the Mb300 Horizontal Array Kit (Partial Array Shown) Electro-Voice® 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952
