USER MANUAL OIL FILLED RADIATOR DragonPlus7-1.5W DragonPlus7-1.5WB DragonPlus9-2.0W DragonPlus9-2.0WB DragonPlus11-2.5W DragonPlus11-2.5WB Thank you for choosing electriQ Please read the manual before using this heater and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire product range THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED SPACES OR OCCASIONAL USE.
CONTENTS SAFETY INSTRUCTIONS 3 PRODUCT OVERVIEW 5 DISPLAY 6 CONTROL PANEL 7 REMOTE CONTROL 7 OPERATION 8 CONNECTING THE APPLIANCE TO WIFI 9 CONTROLLING YOUR APPLIANCE THROUGH THE APP 15 MAINTENANCE 20 TROUBLESHOOTING 20 TECHNICAL DATA 21 SUPPORT 21 PRODUCT FICHE 22 2
SAFETY INSTRUCTIONS IMPORTANT Carefully read the instructions before operating the unit This appliance is for indoor use only. Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. Installation must be in accordance with regulations of the country where the unit is used. If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician.
Do not use an external timer. Do not cover the appliance, or place items close to the unit which may restrict airflow, as this may present a fire risk. The heater must not be located immediately below a socket outlet. Always place the unit on a dry and stable surface. Do not move or tilt the unit. Avoid keeping the unit in direct sunlight for a long period of time. The heater is designed to be used at temperatures above -20°C.
PRODUCT OVERVIEW 1. Handle 2. Digital display screen 3. Control panel 4. Power switch 5. Cord storage with hook 6.
ASSEMBLY INSTRUCTIONS • The castors must be attached before the heater is operated. • Castors are supplied with the device. You must mount them on the supplied mounting plates and then attach these to the unit before use. WARNING: Do not operate without the castors. Only operate the heater in an upright position. POSITIONING THE HEATER • • • Place the unit in an upright position on a flat, stable and heat-resistant surface.
CONTROL PANEL The unit can be operated using the remote control or the control panel on the side of the unit. Increase desired Temperature Change the heat level between Low, Medium and High Set the Standby / Start Timer Decrease desired Temperature On / Off Button Please note the unit must be turned on using the power switch before use REMOTE CONTROL The buttons on the remote allow the access to the same settings as the main control panel.
OPERATION Turning ON/OFF • Press the power switch on the side of the unit to the "ON" position to power the unit. The power symbol will illuminate on the display. • Press the "ON/OFF" button on the control panel or remote control. The unit will start to operate at the High heat setting. • Press the "ON/OFF" button to stop operation and put the unit into standby mode. • Press the power switch to the OFF position to turn off the power to the appliance.
MODES AVAILABLE FOR SETUP The heater has two different setup modes, Quick Connection and AP (Access Point). The quick connection is a quick and simple way to set the unit up. The AP connection uses a direct local Wi-Fi connection between your phone and the heater to upload the network details. When first turned on using the switch on the rear of the unit, the power indicator will flash rapidly, showing that the unit is in Quick connection mode, and ready to set up.
CONNECTING THE APPLIANCE TO WIFI DOWNLOAD THE APP TO YOUR PHONE Download the” TUYA SMART” app, from your chosen app store, using the QR codes below, or by searching for the app in your chosen store.
REGISTER THE APP 1. Press on the register button at the bottom of the screen. 4. A verification code will be sent by the method selected in step 3. Enter the code into the app. 2. Read the Privacy policy and press the Agree Button. 5. Type in the password you would like to create. This needs to be 6-20 characters, with letters and numbers. 11 3. Enter your email address or phone number and press continue to register. 2. The app is now registered.
SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses as such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices. When new devices are added, they are assigned to one of the rooms you have created. CREATING ROOMS 1. Press on the ADD HOME button. 3.
CONNECTING USING THE QUICK CONNECTION METHOD Before initiating the connection, make sure the unit is in standby mode (Power switch ON, but unit turned off), with the power indicator flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the Wi-Fi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4. Enter your Wi-Fi password and press confirm. 2.
CONNECTING USING APP MODE ALTERNATIVE METHOD Before initiating the connection, make sure the unit is in standby mode, with the power Indicator flashing once per second. If not follow the instructions for changing the WiFi connection mode. Also ensure your phone is connected to the Wi-Fi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4.
CONTROLLING YOUR APPLIANCE THROUGH THE APP THE HOME SCREEN Each device has its own entry on the home screen to allow the user to either quickly turn the unit on or off, or to enter the device screen to make other changes. Voice Control: Press to give verbal instructions for operation. Add Device: Add a device to the app, and go through the setup process.
DEVICE SCREEN The device screen is the main control screen for the heater, providing access to the controls to amend the functions and settings. Back: Returns to the Home Screen Device Name Edit Name: Use to change the name of the heater Current Mode: Shows the mode the heater is currently working in. Desired Temperature: Displays what has been set as the target room temperature.
SMART SCENES Smart Scenes is a powerful tool providing the option to customize the operation of the air heater based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. SCENE Scene allows for a one touch button to be added to the Home Screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a range of other influences, depending what other TUYA enabled devices you have on the network. 1. Press on the Scene tab at the bottom of the Home screen 2. Press on the Automation tab at the top of the screen. 4. Setup is very similar to the scene setup on the previous page, and includes an extra section for specifying a trigger for the scene to start.
PROFILE TAB The profile tab gives you the option to edit both your detail, and use the added features of the unit. HOME MANAGEMENT Home Management proves options for managing your TUYA account, giving options such as adding a home, adding and removing rooms, and sharing devices with family.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. CLEANING THE SURFACE Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or gaps in the casing. Do not run the unit until completely dry.
TECHNICAL SPECIFICATION Model DragonPlus7-1.5W(B) DragonPlus9-2.0W(B) DragonPlus112.5W(B) Voltage 220V-240V 220V-240V 220V-240V Frequency 50Hz 50Hz 50Hz Minimum heating capacity (indicative) 0.6kW 0.8kW 1.0kW Maximum continuous thermal power 1.5 kW 2.0kW 2.5kW DECLARATION OF CONFORMITY Hereby, electriQ declares that this heater is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.
PRODUCT FICHE Model Identifier: DragonPlus7-1.5W / DragonPlus7-1.5WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 1.5 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 0.6 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 1.
Model Identifier: DragonPlus9-2.0W / DragonPlus9-2.0WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 2.0 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 0.8 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 2.
Model Identifier: DragonPlus11-2.5W / DragonPlus11-2.5WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 2.5 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 1.0 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 2.