User Manual

CCTV TEST MONITOR
AHD+TVI+CVI+CVBS 8MP
User Manual
CCTV TEST MONITOR
AHD+TVI+CVI+CVBS 8MP
User Manual
Display
Signal mode
Video IN
VIDEO TEST
CVBS Test
YES
UTC control/call OSD menu
YES
5 inch TFT- LCD, 800x480 resolution
NTSC/PAL (Auto adapt)
BNC ( Analog/AHD/TVI/CVI) signal input
720P/1080P/ 3MP/4MP/5MP/8MP
The new HD CCTV Test monitor support “4in1” (AHD/ TVI/CVI/
CVBS)video format of up to 2MP~8MP resolution. It also support
PTZ control by RS485 and other special features suchas DC
12V/USB/5V out put, audion test,UTP cable test,LED lighting etc.
It is designed to bring installer maximum conveniecy during
the installation.
Product Funtions:
Video input: Compatible with AHD, TVI,CVI,CVBS signals
of up to 2MP~8MP resolution.
1. 5 inch 800（RGB) x480 resolution. PAL/NTSC(Auto adapt).
2. PTZ control: RS485 Baud-Raud：1200 ~ 115200bps,
compatible with PELCO-D/P protocols.
3. Camorera Power Supply: Power output of DC 12V/1A
for temporarily powering on cameras for angle and zoom
adjustment
4. USB Power Supply: USB2.0 interface provides 5V/1A power
output
5. Audio signal input
6. Enhanced UTP cable, with indicator lights. the cable test
distance can reach 100-150 meters
7.UTC control/call OSD menu
●General
8.Coaxial HD test
AHD tester support 720P 25F/30F/1080P/25F/30F(4MP/
5MP/8MP AHD camera tester is optional)
TVI tester support 720P 25F/30F 1080P 25F/30F(3MP/
4MP/5MP/8MP TVI camera tester is optional)
CVI tester support 720P 25F/30F 1080P 25F/30F(4MP/
5MP/8MP CVI camera tester is optional)
9. VGA input: VGA support (800*600 1024*768 1280*720
1280*1024 1440*900 1920*1080 ) 60HZ
10.HDMI input: VGA support (800*600 1024*768 1280*720
1280*1024 1440*900 1920*1080 ) 60HZ
LED emergency lighting
11.bulit-in 3.7V Lithium polymer bottery, 3000mAh
AHD TVI CVI
Test
UTC OSD control
1.Test monitor
2.Wrist band
3.DC output cable .
4.Audio test cable .
5.Network cable test convertor
6.USB cable
7.EU/US Power adapter
●Product Accessories
●Front Panel
Power Indicator
12V output power indicator
Data transmission indicator
Power on indicator
1
2
3
4
●peration
Pressing on Calls the OSD menu, can be set brightness,
language, reset, etc. Click on to exit.
2.Pressing on and hold the menu button for 5 seconds
to enter UTC mode.“UTC” is displayed at the top of the
screen. Press the menu button to bring up the camera menu
and operate the UTC menu by up/dow/left/right/enter.
Pressing on and hold the menu button for 5 seconds to
exit UTC mode.
3. Pressing on Enter the UTP cable test interface.
The test procedure will start automatically. Pins 1~8
indicates the UTP Cable consistency. Click on to
exit.
4.Pressing or ,enters the PTZ settings page. Set the
parameters using the up/down/left/right arrows.
OTHER TEST
Audio input test
Support RS485,Compatible with protocols
PELCO- D/P, Baud Rate 1200~ 14400bps
PTZ Controller
UTP Cable Tester
VGA input
HDMI input
Enhanced UTP cable, with indicator light, the
test distance can reach 100- 150 meters
POWER
DC12V output DC12V1A power Output
Power Adapter
DC 5V/1A Input
Battery
Built-in 3.7V 3000ma battery
Battery Life
8 hours work after full charge(Withoutsupplying
power to external devices)
Language
12 Languages available
General
Working
Temperature
10°C-+50°C
Working Humidity
30% - 90%
Dimension/Weigh
38mm x 103mm x 41mm /0.5kg
Language
5 ZOOM+
6 ZOOM-
7
Five-way button：OSD menu- up –
down- left -right
8 FOCUS+
9 FOCUS-
10 UTP Cable test
11 Output DC12V1A power
12 5V charging indicator
10 11 12 13 14 15
16 17 18 19
20
13 RS485 Interface
14 VGA input interface
15 Analog / HD TVI/CVI/AHD signal input
16 LED lamp
17 Audio input
18 Output DC5V1A power
19 switch：LED-ON-OFF
20 HDMI input interface
(800*600 1024*768 1280*720 1280*1024
1440*900 1920*1080 ) 60HZ
(800*600 1024*768 1280*720 1280*1024
1440*900 1920*1080 ) 60HZ