User's Manual

ManualsBrandsElec-Tech International ManualsElectronicsLED ceiling lamp



Elec-Tech International Co., Ltd.

Product Instruction Manual

Product Name: LED ceiling lamp

Model No.： 546203XX

Manufacturer: Elec-tech International.,Co.Ltd

Address: No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City,

Guangdong Province, P.R. China 519085

Tel：0756-3390990

Fax：0756-3390778

Web：www.electech.com.cn

Summary of content (8 pages)

PAGE 1
Elec-Tech International Co., Ltd. Product Instruction Manual Product Name: LED ceiling lamp Model No.： 546203XX Manufacturer: Elec-tech International.,Co.Ltd Address: No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R. China 519085 Tel：0756-3390990 Fax：0756-3390778 Web：www.electech.com.
PAGE 2
Content 1.ProductIntroduction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 1.1Product Description ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 1.2Schematic Diagram‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 2.ProductFeature‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 2.1Product characteristic ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 2.2Specification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3 2.3Light Distribution‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4 3. Methodof application‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4‐7 4.
PAGE 3
1.Product Introduction 1.1. Product Description 1 Dimension: Φ408x95mm Lamp plate:SPCC Powderspray, lamp cover:PMMA opticaldiffuser Built‐in drive&fire prevention drive box 2 SUM‐LED‐2835 3 Built‐buletooth louder 1.2. Product schematic diagram: 2. Product Featuers: 2.1. Product characteristics ： a. Long lifetime (above 50,000hrs), 7 times of lifetime of fluorescent lamp: b.
PAGE 4
RatedInputcurrent/A RatedI‐THD Whether the dimming Rated R9 LED type/Qty. Lm Rated Lumen Output 0.2A <20% Yes >15 SMD2835 /30+30PCS 3000K＝1500lm 4000K＝1600lm 5000K＝1500lm LuxIlluminance(1.5m)/Lux KCCT 3000K/4000K/5000K RaCRI Beam Angle Physical information Material Operating temperature Storage temperature IPrating Luminairedimension(L×W×H)/mm Netweight hrsLifetime/hrs 2.
PAGE 5
2. Install the electrical box screws（#8-32UNC） in the junction box. 3. Connect the black color L line(Mark 1) to the L line come out from junction box with the wirecap. Connect the white color N line(Mark 2) to the N line come out from junction box with the wirecap. Connect green color ground line(Mark 3) to the ground line come out from junction box with the wirecap. 4. Put the central holes of the fixture plate across the screw of the junction box.
PAGE 6
5. Rotate fixture plate per the direction of arrow and lock it tightly with the screw lock 6.
PAGE 7
4. Maintenance instruction 4.1 Do Not use volatile solvent such as alcohol to clean the troffer. 4.2 Use soft cotton cloth with suds to clean the troffer . 4.3 Non-profecssional Do not attempt to take apart and repair the troffer . 4.4 Please use the constant-current driver exclusively adaptive to the troffer, do not change the driver without permission .
PAGE 8
．FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.