ℶ ❐ 広 㢝 Product Instruction Manual ӗ૱〠˖ LED ㆂ⚟ Product Name: LED downlight රਧ㕆⸱˖ 53166161-A Model No.˖ 53166161-A ⭏ӗ୶˖ᒯьᗧ䊚⏖䗮⭥≄㛑ԭᴹ䲀ޜਨ Manufacturer: Elec-tech International.,Co.Ltd ൠ ൰˖ᒯьⴱ⨐⎧ᐲୀᇦ⒮䭷䠁ࠔ䐟 1 ਧ Address: Guangdong Province Zhihai City, Tanjiawan, No.
㖁 ൰ Web˖www.electech.com.cn ⴞ ᖅ 1. ӗ૱ㆰӻ Product Introduction----------------------------------------------------------------------3 2. 1.1. ӗ૱᧿䘠˖Product Description ----------------------------------------------------------3 1.2. ӗ૱⽪മ---------------------------------------------------------------------------------------3 ӗ૱⢩ᙗ-------------------------------------------------------------------------------------------------3 2.
1. ӗ૱ㆰӻ Product Introduction 1.1. ӗ૱᧿䘠˖Product Description ˖ ˄䝽ᇎ⢙മ with physical map˅ 1.2. ӗ૱⽪മ˖ Product schematic diagram˖ 1ˊ ཆᖒቪረ:190*83mm. Dimension: 190*83mm. 2ˊ ཆ༣Ѫ AL+PBT Housing AL+PBT 3ˊ ཆ㖞⭥Ⓚ. Remote driver 4ˊ 儈Ӟ LED ⚟⨐.
2. ӗ૱⢩ᙗ Product features 2.1. ӗ૱⢩⛩ Product characteristic ˖ 䮯ሯભ 5 зሿᰦԕк˗ Long lifetime (above 30,000hrs) b. 儈᭸㢲㜭⧟˗؍ High efficiency, energy saving, environmental friendly c. 㙀ߢࠫ,ᣇ䴷㜭࣋ᕪ,ᰐ㍛ཆ㓯઼㓒ཆ㓯䗀ሴ ˗ Impact resistant, shock resistant, no UV and IR radiation d. 㔯㢢⧟ˈ؍ᰐᴹᇣ≄փᧂ᭮ˈ֯⭘✝䟿վˈᆹޘਟ䶐DŽ Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable . e.
ᱮ㢢ᤷᮠ/Ra CRI ⢙⨶৲ᮠ Physical information ᶀ䍘 Material ᐕᓖ operating temperature ۘᆈᓖ storage temperature 䱢ᣔㅹ㓗 IP rating ⚟ާ㿴Ṭ(L×W×H)/mm Luminaire dimension(L×W×H)/mm ߰䟽/g Net weight 䇮䇑ሯભ /hrs Lifetime/hrs ı $/ǃ3%7 ća ć ̚ ćDŽ ,3 PP .J K 3 ֯⭘ᯩ⌅ Method of application 3.1 ֯⭘ᯩ⌅ A.ሶ⚟ާ઼㖁਼ޣᰦ䙊⭥. B.䘋㹼䝽ሩ˄䝽ሩᡀ࣏ˈ⚟ާ䰚⛱ࠐл˅ C.䝽ሩᡀ࣏ˈᢃᔰ APP ⭼䶒ਟ䘋㹼ᔰˈޣ䈳ˈݹ䈳㢢 3.2 ᆹ㻵⽪മ(A) Installation schematic diagram(A) A ࠷ᯝ⭥ⓀˈỰḕᆹ㻵ㆂቪረDŽ A:Turn off the power supply.
C:䙊䗷ᆹ㻵ㆂ䘹ᤙᕩ㉗പᇊ⡷Ⲵᆄսˈ5 ረㆂᆄսྲᐖлമˈ6 ረㆂྲਣлമDŽ 5 ረㆂ 6 ረㆂ D:䘎᧕ྭ䘎᧕ಘDŽ D: Connect the male to the female connector. E:ሶㆂ⚟㻵䘋ᆹ㻵ㆂᒦ㍗DŽ E: Squeeze the “V shape” clips to match the grooves on the inside of the can, and slide the luminaire up into the can firmly. F:ሬ䙊⭥Ⓚ F: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status.
3.2 ᆹ㻵⽪മ(B) Installation schematic diagram(B) A ࠷ᯝ⭥ⓀˈỰḕᆹ㻵ㆂቪረDŽ A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit kit can fit the luminaire. Picture 1 B:ሶ E26 ⚟ཤ䘋ᒦ㍗ B: crew clockwise the E26 adaptor into the lamp holder. Tighten.
D:䘎᧕ྭ䘎᧕ಘDŽ D: Connect the male to the female connector. E:ሶㆂ⚟᤹㇝ཤᯩੁ㻵䘋ᆹ㻵ㆂѝDŽ E: slide the luminaire up into the can firmly. E:ሬ䙊⭥Ⓚ E: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status.
3.3 㔤ᣔ䈤᰾ Maintenance Instruction *Ѫᔦ䮯֯⭘ሯભ䈧य֯⭘䞂㋮ㅹᥕਁᙗⓦࡲᬖᤝ⚟փ˗ *Do Not use volatile solvent such as alcohol to clean the troffer. *⌱ᰦਟԕ֯⭘Ḅỹᐳ⋮㛕Ⲳ≤ᤗᒢਾᬖᤝ⚟փ˗ *Use soft cotton cloth with suds to clean the troffer . *䶎уъӪ༛䈧य˗ާ⚟؞ *Non-profecssional do Not attempt to take apart and repair the troffer .
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.