GSM pager for vehicles ZEUS v1 User manual v1.
The WEEE (Waste Electrical and Electronic Equipment) marking on this product (see left) or its documentation indi- cates that in the EU the product must not be disposed of together with household waste. Safety instructions Please read and follow these safety guidelines in order to maintain safety of operators and peoplearound. Pager for vehicles ZEUS (further referenced as the system) contains an integrated radio transceiver operating in GSM900 and GSM1800 bands.
“ELDES UAB” is not affiliated with GSM operators providing cellular services therefore is not responsible for the quality of cellular services. Manufacturer Warranty The system carries a 24-month warranty by the manufacturer “ELDES UAB”. Warranty period starts from the day the system has been purchased by the end user. The warranty is valid only if the system has been used as intended, following all guidelines listed in the manual and within specified operating conditions.
CONTENT 1. General Information 1.1 Function...................................................................................................... 1.2 Operation Description.................................................................................... 1.3 Technical Specifications ................................................................................ 1.4 Connector Functionality................................................................................. 1.5 Connection Circuit...............
1. General Information 1.1 Function The system ZEUS is a micro-processor device used to remotely observe and control cars, motorbikes and other vehicles through GSM network. Examples of system usage: Informing the user by an SMS message or phone call about the engagement of the car security system. Your security system detectors will always be adjusted correctly and your car will never disturb you or your neighbours unnecessarily. Vehicle search services through www.locator.
USEFUL INFORMATION It is worth to choose the same GSM cellular provider as most users use assuring fast and reliable SMS message delivery and phone call connection. 1.
Main connector pin-out No. 1 2 3 4 5 6 7 8 Labeling n.c. Z3 Z2 Z1 ON2 ON1 GND +12V Explanation Not connected “low” level input Z3 “low” level input Z2 “low” level input Z1 Arming with “high” level (positive) Arming with “low” level (negative) negative supply (earth) pin Positive power supply input (+12..24V) Wire color Brown Blue Orange Yellow Green Black Red 1.5 Connection Circuit Fig. No2.
ON1 and ON2 inputs are equivalent; they only differ in input levels. It is sufficient connecting only one of them. Most often they are connected to system output that is connected to the relay blocking a particular circuit in car installation when the alarm is armed. If the system ZEUS is installed independent from security system or if there is no alarm system in the vehicle, connect ON1 to the hidden switch J1, the other pin of which is connected to the vehicle body (ground).
2. System pre-operation and essential control commands VERY IMPORTANT!!! Underscore symbol „_‟ in this manual is used to represent space. When writing SMS messages, every underscore symbol should be replaced by single space symbol. XXXX – means password. Don‟t leave any space at the beginning and the end of the message. 2.1 Checking SMS central number SMS central number can be checked as long as factory default password is not changed.
2.2 Administrator Password Change All SMS commands start with a password, please memorize it. Manufacturer default password is four zeros 0000, which is necessary to change! Manufacturer default password can be changed by sending the following SMS message to ZEUS system: 0000_PSW_XXXX To replace your password send the following SMS message: YYYY_PSW_XXXX XXXX is any four digit number except four zeros. Non-numerical characters like dots, colons, spaces are not allowed. YYYY is the old system password.
2.3.3 Deletion of Administrator Numbers To erase a second administrator number send an SMS message: XXXX_NR2:DEL The system will not allow erasing first number NR1. It can only be modified. E. g. XXXX_NR2:DEL 3. Additional system capabilities 3.1 Security zones and Configuring input impulse duration 3.1.1 Zone settings. STATUS To find out current input names and their settings send the following SMS message: XXXX_STATUS You will receive the answer: e. g.
3.1.3 Enabling/disabling zones USEFUL INFORMATION The zones can be enabled/disabled together or separately one by one. NOTE Manufacturer set all the zones activated, i. e. in mode ON. Enabling Zone Any zone can be enabled by sending the following SMS message: XXXX_Z1:ON_Z2:ON_Z3:ON e.g. XXXX_Z2:ON; Disabling Zone Any zone can be disabled by sending the following SMS message: XXXX_Z1:OFF_Z2:OFF_Z3:OFF e.g. XXXX_Z2:OFF; 3.1.
This time setting is changed by sending the following SMS message: XXXX_TSEC:TT where TT means the delay in milliseconds after turning on secure mode. Possible TT values are 100-30000. Measuring is every 100. E. g., XXXX_TSEC:20000 means that after arming security system it will not react to any triggered sensor for 20 seconds. 3.2 Info on Status SMS System ZEUS can be inquired at any time about its status, signal strength. At the same time system can be tested.
3.5 Notification about Discharged Vehicle Battery When vehicle battery is low, the system sends SMS message notifying that the battery of the vehicle is running low. This message is delivered when ius baigia išsikrauti. This message is delivered when vehicle battery voltage is 11 volts for 40 seconds and longer. To disable this feature, send SMS message: XXXX_M:OFF To re-enable this feature, send SMS message: XXXX_M:ON 4. Appendix 4.
· · · · · · Received SMS message “Incorrect Format” No sound No sound while listening to remote microphone no network signal user number is not programmed in user list incorrect syntax extra space symbol left in SMS message neprijungtas mikrofonas neteisingai prijungtas mikrofonas · micropone not connected · Microphone connection incorrect If your problem could not be fixed by the self-guide above, please contact your distributor or ELDES tech support by email support@eldes.
Made in Lithuania. www.eldes.