Specifications
Table Of Contents
ELD4RT1227
ELD4RT1240
PROJECT INFORMATION:
DIMENSIONS
PRODUCT SPECIFICATIONS
CATALOG NUMBER
Features: Quick terminal connector. Advanced heat
sink design for best heat dissipation to maintain
maximum LED module life. Suitable for use in fixtures
installed in insulated ceilings. Limited 5 year warranty.
UL Listed.
Meets restricted air flow requirement (per ASTM
E-283). CA Title 24 compliant. Meets ENERGY STAR
requirements.
The ELD4RT insert is a 2-wire connector unit for
installation into cans with a mating 2 wire connector only.
To use the ELD4RT insert in an incandescent
can with medium base socket, the “PSA30 adaptor”
(medium socket to 2-wire connector) is included.
Example
: ELD4RT1227
Project Name:
4" LED Insert Kit
Fixture Type:
Date:
Lamp: CREE COB chip, CRI 90
50,000 hours life expectancy
Driver: 120V AC, high quality driver, dimmable
ELD4RT1227 = 2700°K, 12.9W LED, 850 lm
ELD4RT1240 = 4000°K, 12.9W LED, 900 lm
Note: Trim is not included. Can is not included.
TRIMS
4” Reflector Trim
EL
4330W
EL
4330B
EL
4330BZ
EL
4330C
EL
4330CP
O.D.: 5”
4” Baffle T
rim
EL
4331W
EL
4331B
EL
4331
BZ
EL
4331N
EL
4331CP
O.D.: 5”
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: (323) 231-2600 Fax: (323) 231-3200 • www.elcolighting.com
© ELCO LIGHTING 2014 All Rights Reserved. Rev. April 2014. ELCO Lighting reserves the right to make specification and design changes without notice.
ELCO
LIGHTING
ELCO Lighting©
ELCO Lighting©
Project Name:
PROJECT INFORMATION:
DIMENSIONS
PRODUCT SPECIFICATIONS
CATALOG NUMBER
Fixture Type:
Date:
ELCO Lighting©
ELCO Lighting©
EL49730B
EL49730W
4” LED Pull Down Insert Kit
Example: EL49730B (Black)
EL49730W (White)
ELCO
LIGHTING
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: (323) 231-2600 Fax: (323) 231-3200 • www.elcolighting.com
© ELCO LIGHTING 2015 All Rights Reserved. Rev. July 2015. ELCO Lighting reserves the right to make specification and design changes without notice.
• Suitable for use in fixtures installed in insulated
ceilings
Suitable for installation into a 4” recessed•
fixtures with 2-wire connector.
Suitable for installation into a 4” recessed•
fixtures with medium base socket, using PSA30
adaptor (included).
tilt, 35 rotation• 65° 6°
Housing meets restricted air flow requirement•
(per ASTM E-283).
• CA Title 24 compliant.
Meets ENERGY STAR requirements.•
Lamp: LED CREE COB chip CRI90
EL49730: 13W, 3000°K, 840 lm, beam angle 36°
LED Driver: 120V AC dimmable
Life-span: 50,000 hours
Labels: UL listed
Warranty: 5 years limited