User manual MITO Industrial radio remote control AT MITO-VETTA-915 Transmitting Unit AR MITO-MINI-915 Receiving Unit ELCA S.r.l. Via del Commercio, 7/b - 36065 Mussolente (VI) ITALY www.elcaradio.com tel.
ENGLISH User manual
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 INDEX a. FEDERAL COMMUNICATIONS COMMISSION (FCC) CONFORMITY AND FREQUENCIES.. II a.1 CONFORMITY.................................................................................................................................................... II a.2 FCC CONFORMITY STATEMENT................................................................................................................ II a.3 FREQUENCIES...................................
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 a. FEDERAL COMMUNICATIONS COMMISSION (FCC) CONFORMITY AND FREQUENCIES a.1 CONFORMITY Each MITO-VETTA-915 series’ radio remote control working in the frequency band 920.000 - 921.150 MHz complies with Part 15 of standards FCC. Transmitting Unit AT MITO-VETTA-915 FCC ID: 2ABS7-ATMIVE915 Receiving Unit AR MITO-MINI-915 FCC ID: 2ABS7-ARMIMI915 a.2 FCC CONFORMITY STATEMENT This device complies with part 15 of the FCC Rules.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 1. USER MANUAL Read this Manual before operating the Radio Remote Control. For ease of reference, symbols have been placed at the side of paragraph titles to highlight important information contained in the text. To become familiar with your radio remote control: radio remote control technical data. Maintenance and troubleshooting.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 2. USE INSTRUCTIONS 2.1 GENERAL INFORMATION The ELCA Radio System Type MITO is an innovative family of low-power industrial radio remote controls, used to control appliances that do not require Stop safety function, with category great than CAT 1 and PL C according to EN ISO 13849-1.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 IMPORTANT ! Radio remote control user MUST: -- Check the correct mechanical operation of the STOP button before every operation. -- Check the correct operation of the control devices. If there is a deterioration in the correct operation of the STOP button or functional abnormalities in the control devices, the use of the radio remote control must be prohibited until the full restoration of the system’s functionality.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 2.4 TRANSMITTING UNIT AT MITO-VETTA-915 T9 T10 T7 T11 Check light T12 CHECK STOP TA02 ON / OFF Charge light CHARGE T4 T3 T5 T2 T8 T1 GENERAL FEATURES. • Battery charge indication. When the battery is charged, the Check light blinks quickly (1 flash per second).
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 2.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 2.6 STORING ACCESS CODES In order to associate a transmitter to receiver, the transmitter access code needs to be stored in the receiver memory. The access code is a unique code set at the factory that prevents the receiver installed on the machinery from responding to any unauthorised transmitters.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 Delete mode: The delete mode removes from the receiver memory ALL access codes of transmitters associated. IS RECEIVER POWERED ON? YES REMOVE POWER FROM RECEIVER OPEN RECEIVER COVER AND NOTE SETTINGS OF MODULE MICROSWITCHES SET DIP 1,2,3 TO OFF AND DIP 4 TO ON. POWER ON RECEIVER. IS STATUS LIGHT ON STEADY? NO CHECK RECEIVER POWER SUPPLY AND SETTING OF DIP 4 AND REPEAT PROCEDURE YES SET DIP 1 TO ON.
ENG man MITO-VETTA 915 00 Radio Remote Control System MITO-VETTA-915 2.7 INFORMATION FOR MAINTENANCE Please remember that the receiving unit should be disconnected from power supply and the transmitting unit should be powered off during maintenance procedures. The Radio Remote Control System requires minimal maintenance, however, following these few simple tips will help keep it in good working order.
