MAGRF User Manual
©2021 MAGMATIC EFFECTS all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. MAGMATIC EFFECTS logo and identifying product names and numbers herein are trademarks of MAGMATIC EFFECTS. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
MAGMATIC EFFECTS 6122 S. Eastern Ave. | Los Angeles, CA. 90040 323-582-3322 | 323-832-9142 fax www.elationlighting.com | sales@magmaticeffects.com Elation Professional B.V. Junostraat 2 | 6468 EW Kerkrade, The Netherlands +31 45 546 85 66 | +31 45 546 85 96 fax www.elationlighting.eu | info@elationlighting.
DOCUMENT VERSION Due to additional product features and/or enhancements, an updated version of this document may be available online. Please check www.elationlighting.com for the latest revision/update of this manual before beginning installation and/or programming. Date Document Version Software Version DMX Channel Mode 09/29/21 1.
CONTENTS General Information 6 Limited Warranty (USA Only) 8 Warranty Returns (USA Only) 10 Safety Guidelines 12 Overview 14 Operation 16 Specifications | Ordering Information 19 FCC Statement 20 5
GENERAL INFORMATION INTRODUCTION Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device. These instructions contain important safety and use information. UNPACKING Every device has been thoroughly tested and has been shipped in perfect operating condition. Care-fully check the shipping carton for damage that may have occurred during shipping.
GENERAL INFORMATION CUSTOMER SUPPORT Contact MAGMATIC customer service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments, or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | sales@magmaticeffects.com ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET Voice: +31 45 546 85 63 | Fax: +31 45 546 85 96 support@elationlighting.eu REPLACEMENT PARTS: Please visit parts.elationlighting.
LIMITED WARRANTY (USA ONLY) A. Magmatic Effects hereby warrants, to the original purchaser, Magmatic products to be free of manufacturing defects in material and workmanship for a period of two years (730 days) from the original date of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
LIMITED WARRANTY (USA ONLY) D. This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-up. During the periods as specified above, Magmatic Effects will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship.
WARRANTY RETURNS (USA ONLY) To obtain warranty service, a Return Material Authorization (RMA) number must first be obtained from MAGMATIC. It is the Customer’s responsibility to provide product proof of purchase and serial number by acceptable evidence such as an invoice copy or an approved MAGMATIC Extended Warranty Certificate (“EWC”) and any relevant maintenance records at the time warranty service is sought.
WARRANTY RETURNS (USA ONLY) Products returned for warranty service without an RMA number clearly marked on the outside of the package will be refused and returned to the shipper at the Customer’s expense. Products returned for warranty service, which are received damaged due to inadequate and/or improper packaging and/or due to damage caused by the shipping carrier, may incur additional repair charges before warranty service begins and/or may void this warranty.
SAFETY GUIDELINES • • • • • • • • • • In order to prevent the risk of fire or electrical shock, do not expose this device to rain or moisture. After bringing the device from outdoors into a warm indoor environment, allow the device time to reach the same temperature as its surroundings. This will reduce the risk of condensation forming inside the unit, which can damage the device or hinder its performance. This unit is intended for indoor usage only.
SAFETY GUIDELINES • • • If serious problems arise, discontinue use of the device immediately, and contact your dealer or Magmatic Effects immediately for advice. In the event that the device needs to be returned for service, use only the original packaging for transportation. Do not perform any repairs or modifications to the device on your own, as doing so voids all manufacturer’s warranty coverage. Please refer all repair or maintenance procedures to an authorized dealer or technician.
OVERVIEW RECEIVER 14
OVERVIEW TRANSMITTER 15
OPERATION 1. Locate the card input slots on your Magmatic device. Use a screwdriver to remove the slot cover for one of the input slots, then insert the MagRF module and fasten it in place with the module’s mounting screws.
OPERATION 2. Check the display screen on your Magmatic device. The Bluetooth icon and the letters “RF” should appear at the top of the screen, as shown below.
OPERATION 3. Select the Personality icon on your Magmatic device’s touch screen, then select the “RF Learn” option. Press any of the four keys on the transmitter to pair the transmitter. If pairing is successful, a notification reading “Complete” will appear. On the other hand, if no action is taken within 20 seconds, or if pairing is unsuccessful, a prompt reading “Failed, Try Again” will appear. 4.
SPECIFICATIONS 433 MHz Wireless Frequency 50m Effective Distance (open space with clear line of sight from transmitter to receiver) Function varies with Magmatic fixture model 27A / 12V Transmitter Battery Receiver Dimensions (LxWxH): 3.4” x 2.2” x 0.8” (86mm x 56mm x 21mm) Receiver Weight: 1.1 oz (32g) Transmitter Dimensions (LxWxH): 2.6” x 1.4” x 0.6” (65mm x 36mm x 15mm) Transmitter Weight: 1.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.
FCC STATEMENT If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following methods: • Reorient or relocate the device. • Increase the separation between the device and the receiver. • Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
