2.4GHz 2.4GHz Wireless Digital Audio Users Manual 1. INTRODUCTION 2. PACKAGE CONTENTS 3. CONTROLS 4. SYSTEM INSTALLATION 5. OPERATIONS 6.
GENERAL SAFETY SUMMARY CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: DO NOT REMOVE THE COVER FOR REDUCING THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard , do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1.All the safety and operating instructions should be read before the product is operated. 2.The safety and operating instructions should be retained for future reference.
10.Power supply cord should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, or other sources, refer to the operating instructions. 11. For added protection for this product during a lightning storm, or it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect cable system. This will prevent damage to the product due to lightning and powerline surges. 12.
INTRODUCTION Overview The 2.4 GHz Wireless Digital Audio uses the latest wireless technology to transmit crystal-clear audio in a digital format. It makes you enjoy the true CD quality by eliminating the hassle of wire, and allows you to experience your favorite music where it belongs - on your stereo. Main Features Digital Transmission higher sound quality 20 Hz ~ 20KHz (-1dB) Audio Frequency Response +10 dBm Transmit Power. 92 dB Dynamic Range Audio Input Level : 4Vpp (Max).
Application Wireless home theatre systems for two rear speakers Wireless hi-fi stereo speaker systems Short-range Audio Broadcasting Specification CAUTION Characteristic Description Power supply Current consumption Operating temperature Frequency band Modulation Channel number Channel spacing Channel frequency Frequency stability Input impedance Input level TX Power RX Sensitivity Output impedance Output level Response Dynamic range Separation SN ratio THD Specification Digital Audio Transmitter Digital
PACKAGE CONTENTS Check all of the components shown as below are included in box before using. 1. Transmitter 2. Receiver 3. RCA Cable 4. 9V DC Power Adaptor 5. Users Manual X1 X1 X2 X2 X1 Transmitter Receiver Adaptor RCA Cable CONTROLS 1. 2. 3. 4.
SYSTEM INSTALLATION 1. Connect the Transmitter to audio source with RCA cable. 2. Connect the Receiver to Speaker or Audio Source Headphone with RCA cable. 3. With power adaptors plug the Transmitter and Receiver into standard electrical outlets. Transmitter 4 1 3 2 Speaker Receiver OPERATIONS NO NO 1 2 3 CH6 1 2 3 CH3 1 2 3 CH7 1 2 3 CH4 NO NO NO NO 1 2 3 CH5 1 2 3 CH2 NO 4 1 2 3 CH1 NO 1. Turn on the Transmitter and Receiver. 2. Turn on audio source and speaker. 3.
TROUBLE SHOOTING Please read this users manual carefully before using the Wireless Audio Product. If you still have difficulties to use the product, consult the following syndrome, which will guide you to solve most common problems. No Sound 1. Check the adaptor rightly connected. 2. Power On/Off switch is in right position. 3. Check all the cables well and rightly connected. 4. Check Transmitter and Receiver at the same channel. Having Interference 1.
Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2.4GHz 2.