2.4 GHz WIRELESS SURVEILLANCE SYSTEM USER'S MANUAL 1. INTRODUCTION . INTRODUCTION 2. PACKAGE CONTENTS . PACKAGE CONTENTS 3. CONTROLS . CONTROLS 4. SYSTEM INSTALLATION . SYSTEM INSTALLATION 5. OPERATION . OPERATION 6. TROUBLE SHOOTING .
GENERAL SAFETY SUMMARY CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: DO NOT REMOVE THE COVER FOR REDUCING THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard , do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1.All the safety and operating instructions should be read before the product is operated. 2.
1. INTRODUCTION Overview The Wireless Surveillance System with CMOS/CCD Images and four channels available is just as your baby sitter, home/camp guard and company monitoring. Easy to install, unequalled quality and reliability make you have delighted and secure life. Features High Resolution Color CMOS/CCD Camera( Optional ) High Performance Audio/Video Receiver Built-In Microphone for Audio Monitoring Operating frequency of ISM band 2.4 - 2.
Specifications Model Characteristic Scanning System Image Sensor Efficiency Pixels Horizontal Scan Frequency Vertical Scan Frequency Synchronize Resolution Min. Illumination S/N Ratio Video Input Auto Electronic Exposure Auto White Balance Supply Voltage Power Consumption Operation Environment Lens (Optional) Audio Input Weight Size Model Characteristic Scanning System Image Sensor Efficiency Pixels Horizontal Scan Frequency Vertical Scan Frequency Synchronize Resolution Min.
Receiver Specification Model Characteristic Frequency Receiver Sensitivity Channel Number L.O. Stability Video Output Level Audio Output Level Supply Voltage Power Consumption Antenna Operation Environment Dimension 2400 MHz ~ 2483 MHz -90 dBm (min.) 4 (2414,2432,2450,2468 MHz) 100 KHz (typ.) 1Vpp / 75 1Vpp / 600 9V 200mA (typ.
2. PACKAGE CONTENTS One unit of Wireless Camera The Wireless Camera emits Audio and Video signals over 2.4GH z radio frequency carrier. One unit of Receiver The Receiver receives 2.4G H z wireless Audio and Video signals from the Wireless Camera. One unit of Wall Mounting Bracket The wall mounting bracket is used to bolster up the Wireless Camera on the wall. Two units of Power Adaptor Two power adaptors supply +9V(300mA) DC power to the Wireless Camera and the Receiver.
3. CONTROLS Wireless Camera Front 1 1. Lens 2. Microphone 2 Bottom 4 3. Channel Rubber 4. Tripod Screw Nut ( Ceiling Mounting Screw Nut) 5. Power Cable 6. Power Indication LED 7. Wall Mounting Slide 5 7 6 3 Top 8. Ceiling Mounting Screw Nut 8 Receiver Front & Side 1 1. Power Switch 2. Channel Selector 3. AV Connector 4. Adaptor Connector 5.
4. SYSTEM INSTALLATION Wireless Camera Fasten the Mounting Bracket on the wall or ceiling (must under the roof). Slide the Wireless Camera into the Wall Mounting Bracket. 6 Connect Wireless Camera with the attached adaptor; and plug the adaptor into the power outlet. Combine the Tripod and Wireless Camera to assist parents in taking care of the baby.
Two ways to combine the Ceiling Mounting Bracket and Wireless Camera. (Ceiling Mounting Bracket is selected.) 2. Screw the ceiling mounting bracket into screw nut on bottom of the wireless camera. 1. Screw the ceiling mounting bracket into screw nut on top of the wireless camera. Re c e i v e r Phone plug to 2RCA/SCART connecting with TV A/V Phone plug to 2RCA connecting with PC Connect Receiver by phone plug to PCI Capture Card of PC with RCA Cable.
5. OPERATION 1. Turn on the Wireless Camera and Receiver. 2. The power indication LED on Wireless Camera and Receiver will light up. 3. Turn on A/V display. 4. Check the channel of Receiver to be same as Camera. ( Camera set up to channel 1 originally. ) * CH1 - * CH1 CH2 - CH2 CH3 - CH3 CH4 - CH4 Switch the Receiver's Channel Selector to Ch1. Image will show on A/V display if the channel of Wireless Camera and Receiver is at the same one.
6. TROUBLE SHOOTING Please read this user's manual carefully before using the Wireless Surveillance System. If you still have difficulties to use the Wireless Surveillance System consult the following syndrome, which will guide you to solve most common problems. Interference in the Image and Sound Move your Wireless Camera or Receiver slowly to find a best reception position. Shorten the distance between your Camera and Receiver.
How to adjust the Channel Selector of Wireless Camera Use a tool to open the channel rubber. Switch inside selector by the tool to adjust the channel you want to set. Ch4 Ch3 Ch2 Ch1 Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
2. 4 Hz G Wi es rel s SURV EILLANCE SYSTE M ELANsat Technologies USA 1813E. Dyer Rd. Unit 403 Santa Ana, CA 92705 TEL: (949) 851-1868 FAX: (949) 851-1808 E-mail: usa@elansat.com sales @ samsonic.com Version 1.
