2 .
GENERAL SAFETY SUMMARY CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: D O N O T RE MOVE THE COVER FOR REDUCING T H E RISK OF ELECTRIC SHOCK. N O U S E R - S E R V I C EABLE PARTS INSIDE REFER SERVICING TO Q UALIFIED SERVICE PERSONNEL . WARNING To prevent fire or shock hazard , do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. All the safety and operating instructions should be read before the product is operated.
9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type or power supply to your home, consult your product dealer or local Power Company. For products intended to operate from battery power, or other sources, refer to the operating instruction. 10.
When the product exhibits a distinct change in performance - this indicates a need for service. If the products has been dropped or damaged in any way. 15. 16. 17. 18. 19. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Table of Contents Overview ................................................................... 1 .................................................................1 Features ...................................................2 Package Contents Names of parts ..................................................... 3 .................................................................4 Operation Setting up .................................................................5 Charging the batteries ....................
Overview The Wireless Surveillance System with CMOS Images and four channels available is just as your home and company monitoring. Special design for home and office surveillance demands with IR LED Illuminator to enhance night vision can secure your surroundings all day long. 2 AA rechargeable batteries adequately supply 4 hours long working time, power supply and charging circuit design help you to charge the battery or make the camera proper working without interrupt.
Package Contents Check the package according to what you bought. (X1) (X1) (X1) (X2) Camera Power Adaptor Users Manual 1.
Operation Swivel-design at camera base Front and back 135 Left 30 Right 30 Power Switch at Four Mode Up to Down 1. Charging mode(only in charging) 2. Camera with IR LED function (night vision)+charging < In this mode, only can use power adaptor to supply the power> 3. Camera+charging 4.
1. Put the camera on a flat or hang on the wall. _ + + _ A B 2. Simply supply the camera power by power adaptor or 2x AA batteries. Setting channel Power on 3. Turn on the power of camera, and the power LED will light up in green. 4. Set up the channel.(one to four channel) 5. The wireless camera has designed in eight IR LED illuminators turned on by Photo Transistor brightness detecting to catch clear images in the unlit environment.
Charging the batteries The camera is made to work by power from 2*AA size batteries(1.5v) or a power adaptor. Rechargeable batteries are always chosen the level of 1.2V/2000mAh. Plug power adaptor into DC jack to charge rechargeable batteries when batteries' power is at low level. LED The LED will light up in red when the batteries are being charged.
Trouble Shooting Please read this users manual carefully before using the Wireless Camera. If you still have difficulties to use the product, consult the following syndrome, which will guide you to solve most common problems. No picture or sound 1. Check the power supply. Ensure the product is properly connected and set. Ensure that product power indicator is illuminate. 2. Make sure the batteries have been inserted into product's battery compartment. 3. Make sure the batteries are full charged. 4.
Specification Item Scanning System Image Sensor Number of Pixels Efficiency Pixels Horizontal Scan Frequency Vertical Scan Frequencyl Synchronize Resolution Description 2:1 Interlace 2:1 Interlace NTSC PAL 1/3"CMOSImage Sensor 250K 365K 510(H) x 492(V) 628(H) x 582(V) 15750Hz 15625Hz 60Hz 50Hz Internal More than 300 TV Lines Min. Illumination 3 LUX (F1.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
6060401501-10