2.
SAFETY INFORMATION CAUTION: RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: DO NOT REMOVE THE COVER FOR REDUCING THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVIEC PERSONNEL. WARNING: To prevent fire or shock hazard, do not expose the unit to rain or moisture. Safety term and Symbols △! △! △ Warning: Warning statements identify conditions or practices that could result in injury or loss of life.
should use a mounting accessory recommended by the manufacturer. 9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type or power supply to your home, consult your product dealer or local power company. For products intended to operate form battery power, or other sources, refer to the operating instruction. 10.
FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
2.5. One unit of Mounting Bracket 2.6. One unit of RCA/SCART Cable 2.7. One unit of USB Cable (Optional) 2.8. One unit of Disk/CD for USB Driver (Optional) 3. Controls / Functions 3.1. Wireless Camera 3.2. Receiver 4. How to Connect 4.1. Wireless Camera 4.2. Receiver 5. Operations 6. Trouble Shooting 6.1. No Picture or Sound 6.2. Unclear Picture 6.3. Interference in the Image and Sound 7. Specifications 7.1. Wireless Camera 7.2. Receiver 1. Introduction 1.1.
2. 3. High Performance Audio/ Video Receiver 4. Built-In Rechargeable Battery 5. Built-In Microphone for Audio Monitoring 6. Infrared Illumination Provides Images in the Darkest Location 7. With CDS Sensor, Auto Switch “ Color” on day time and B/W on night time 8. Antenna embedded 9. Operating frequency of ISM band 2.4 ~ 2.4835 GHz 10. 4 channels selectable 11. Range up to 300 feet (L.O.S.) 12. Easy installation Check Package before Use 2.1.
degrading the function of cells, batteries should be at least charged and discharged once within one year. 10. Keep away from children. If swallowed, contact a physician at once. 11. One year limited warranty against workmanship and material defects. 2.3. One unit of Receiver The Receiver receives 2.4GHz wireless Audio and Video signals from the Wireless Camera. 2.4. Two units of power Adaptors Two power adaptors supply +9V(300mA) DC power to the Wireless Camera and the Receiver. 2.5.
Note: If any accessories listed above are missing, please contact the sales representative where you purchase the Wireless Surveillance System. 13. Controls / Functions 1. Wireless Camera Front & Side Rear 1. IR LED 2. Lens 3. Microphone 4. Rechargeable battery 5. Power 6. DC jack 7. Power indication LED 8. Charge jack Inside Channel Selection Open the battery cover and connect the jumper to the connector. 3.2. Receiver Front & Side Rear 1. 2. 3.
Channel Ⅱ: Flash twice In one time Channel Ⅲ: Flash thrice In one time Channel Ⅳ: Flash quartic In one time 14. How to Connect 4.1. Wireless Camera 4.1.1. Plug the Wireless Camera into the power outlet with attached adaptor or load the charged battery. 4.1.2. Combine the Wireless Camera and the mounting bracket. 4.1.3. Fasten the mounting bracket on the wall or ceiling 4.2. Receiver 4.2.1.
5. Operations -Turn on the power of Wireless Camera, Receiver and A/V display. -The power indication LED on Wireless Camera will light up. -Change the Wireless Camera / Receiver to the same channel. -Wireless Surveillance System watch wherever you want day and night Note: *Gaze at IR LED closely for a long time results in uncomfortable eyes. *The operation temperature is from 0℃ ~ 60℃. 6. Trouble Shooting Please read this user’ s manual carefully before using the Wireless Surveillance System.
-Check if there is any interference radio frequency source near your Receiver source such as microwave oven. 7. Specifications 7.2. Wireless Camera Item Scanning System Specifications 2:1 Interlace 2:1 Interlace NTSC PAL Image Sensor 1/3" CMOS Image Sensor Efficiency Pixels 510 (H) X 492 (V) 628 (H) X 582 (V) Horizontal Scan Frequency 15750 Hz 15625 Hz Vertical Scan Frequency. 60 Hz 50 Hz Synchronize Internal Resolution More Than 230TV Lines Min. Illumination 3 LUX (F1.
Receiver Sensitivity Channel Number L.O. Stability -90 dBm (min.) 4 (2414,2432,2450,2468MHz) ±100 KHz (typ.) Video Output Level 1Vp-p (typ.) Audio Output Level 1Vp-p (typ.) Supply Voltage Power Consumption Antenna Dimension Operating Temperature 9V 200mA (typ.) Embeded 145D x 92W x 40H (mm) -10℃~ +60℃ To provide the latest technologies product to our customer is our responsibility, therefore, we reserve the right to change the specifications without prior notice.