llA[ The life of sound.
Safety Instructions 4. Overload 1. General information Please read and follow these safety instructions. Keep them safe for future reference. Observe all warnings on the speaker and in the manual. Please check the speaker for damage before use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury. 2. Use only as directed Connect the speaker(s) according to the instructions in the manual. Many ELAC speakers are equipped with spikes and/or anti-slip feet.
Philosophy Installing and Removing the Magnetically Attached Grills Thank you for purchasing this ELAC product. Since the time we started (1926), ELAC has always striven to achieve the very best. The grills of your ELAC speakers are designed to be removable if desired. To remove it, hold the top or bottom edges of the grill and pull gently. To replace the grill, place the grill in the normal position on the cabinet and the magnets wil l hold the grill in place.
Speaker Placement Outrigger Feet & Spike Installation Using the included outrigger feet provide a wider support base for the speaker cabinet. The included spikes improve stability on uneven surfaces and thickly carpeted floors. Please use caution when dealing with the spikes as they are sharp. IMPORTANT: When using these spikes on hard surfaces such as wood or tile floors be sure to use the provided floor discs to protect your floor from damage.
Stereo Setup • • Surround Sound Setup For the best results and the most realistic stereo image and lifelike sound, place the speakers so that an equilateral triangle (fig. 2) is created between the speakers and your favorite listening position. This set up creates the optimum imaging performance. If you find that your front left and right speakers are too far apart, angle (toe in) them towards the listening position to gain a more focused central image .
Center Speaker Setup ELAC Americas LLC. North America Limited Liability Warranty The ELAC center channel is designed to produce dialog sounds and should be positioned above or below (fig. 3) your television. Align it with the center of the television. As much as possible, try to keep the center speaker close to the same level (height) as your front speakers for a more even sound stage.
Technische Oaten I Specifications Technische Oaten It. Aufkleber bzw. Beilageblatt / Specifications as stated on label or supplement VELA BS 403 1307x276x332 Dimensions H x W x D in mm 7. 1 Weight in kg 2-WAY, BASSREFLEX Construction Principle Components Diameter in mm 150 Bass Driver AS-XR CONE Diameter in mm Mid-Range Diameter in mm JET 5 Tweeter JET 5 2400 Crossover Frequencies in Hz 70/100 Nominal/Peak Power Handling in Watts 41-50000 Reproduction Range in Hz 86 Sensitivity in dB/2.