Datasheet

ELAC FS 137 JET, the Beauty from the North

This slender 2 1/2-way floorstanding loudspeaker with the

high gloss lacquer baffle and the elegant silk-mat cabinet

offers compact design and state-of-the-art technology,

incorporating ELACs aluminium sandwich woofers and

the legendary JET tweeter.

Due to its new ribbon geometry, the JET III tweeter

provides a cut-off frequency of 50 kHz and is therefore

perfectly suitable for DVD-A and SACD.

The special design of the high gloss lacquer baffle

eliminates diffractions which results in improved tweeter

reproduction.

The FS 137 JET offers great music for all those who want

to enjoy big sound, without big loudspeakers.

Technical features / benefits

• The FS 137 is a 2 1/2-way floorstanding loudspeaker. This means that the two

woofers work in tandem, however the second bass driver becomes de-coupled

above 550Hz when it then operates as a midrange unit.

The JET III tweeter

incorporates a neodymium

magnet system and offers

strong drive. Due to its new

ribbon geometry, the JET III

tweeter, that is manufactured

in Kiel, provides a cut-off

frequency of 50 kHz.

• ELAC’s 140mm aluminium sandwich woofers provide perfect integration while

reducing partial resonances.

• The special design of the baffle eliminates diffraction which results in a very

improved tweeter reproduction.

PAGE 1
ELAC FS 137 JET, the Beauty from the North This slender 2 1/2-way floorstanding loudspeaker with the high gloss lacquer baffle and the elegant silk-mat cabinet offers compact design and state-of-the-art technology, incorporating ELACs aluminium sandwich woofers and the legendary JET tweeter. Due to its new ribbon geometry, the JET III tweeter provides a cut-off frequency of 50 kHz and is therefore perfectly suitable for DVD-A and SACD.
PAGE 2
• The FS 137 JET provides two double flare bass ports on the rear to reduce friction losses. • • Resonances of the cabinet are avoided due to ring-shaped reinforcements. Inserting the ELAC bass control plug (delivered with the product) into the rear bass port will improve the bass sound when it comes to critical room conditions or when it comes to the installation close to walls. This results deep, dry bass sound.