User Manual

ManualsBrandseInstruction GTCO Holdings ManualsElectronicsMENUPAD

Contents

About InterWrite MenuPad

Technical support

Installing MenuPad

Overview of the installation process

Parts checklist

Installing batteries in the MenuPad

Installing the receiver

Installing InterWrite software

Using MenuPad

Basic operation

Other information

About MenuPad help

Care and cleaning

Specifications

Radio frequency emission notices

CE Certification

- END –

About InterWrite MenuPad

InterWrite MenuPad is a wireless touch input tablet system. MenuPad consists of a touch tablet.

One MenuPads communicate wirelessly with a PC through a small radio receiver (MenuPad

Manager) attached to the PC.

MenuPad works with the Software to move the mouse, and enter keystrokes a distance from their

computer. MenuPad can also be used with InterWrite MeetingBoard to expand collaboration to

any meeting participant anywhere in the room. InterWrite MenuPad and Software work with PCs

running Windows 9x/ME/NT/2000.

- END –

Technical support

For additional help in installing, configuring and using InterWrite products, contact GTCO

CalComp Technical Service & Support:

U.S. West Coast

GTCO CalComp Inc.

14555 North 82nd Street

Scottsdale, AZ 85260

E-mail: CalComp.support@gtcocalcomp.com

Phone: 1-480-443-2414

Fax: 1-480-948-5508

Summary of content (7 pages)

PAGE 1
Contents About InterWrite MenuPad Technical support Installing MenuPad Overview of the installation process Parts checklist Installing batteries in the MenuPad Installing the receiver Installing InterWrite software Using MenuPad Basic operation Other information About MenuPad help Care and cleaning Specifications Radio frequency emission notices CE Certification - END – About InterWrite MenuPad InterWrite MenuPad is a wireless touch input tablet system. MenuPad consists of a touch tablet.
PAGE 2
U.S. East Coast GTCO CalComp Inc. 7125 Riverwood Drive Columbia, MD 21046 E-mail: gtco.support@gtcocalcomp.com Phone: 1-410-381-6688 Fax: 1-410-290-9065 - END - Overview of the installation process Note: You will need to supply a Windows 9x/ME/NT/2000 PC. 1. Unpack MenuPad. 2. Install batteries in the tablet 3. Install the receiver (if your system doesn't already have a receiver). 4. Install InterWrite software. Start: Unpack MenuPad. - END – Unpack MenuPad and assure all parts are present.
PAGE 3
Next: Install the receiver (if one isn't already installed). - END – Installing the MeetingPad Manager receiver An InterWrite system incorporating one MenuPads must have a MeetingPad Manager receiver. If your system doesn't have a MeetingPad Manager receiver (available separately), install one now: 1. Turn off the computer and disconnect the keyboard. 2. Using the Y-cable provided with the receiver, connect the receiver and the keyboard to the computer (as shown here). 3.
PAGE 4
Note: If the installation program does not start on its own, use Windows Explorer to locate and launch setup.exe on the CD-ROM. 4. Follow the instructions to install InterWrite. 5. Remove the CD-ROM. 6. Restart the PC. The InterWrite icon should appear in the Taskbar. Next: Installation is complete. - END – Basic operation Note: One MenuPads can communicate with one receiver. Each MenuPad must be within 15 feet (4.5m) of its intended receiver.
PAGE 5
Follow these precautions at all times to avoid damaging MenuPad: Avoid discharging static electricity to the tablet. Do not place heavy objects on the tablet surface. Do not use sharp objects, like compasses or knives, on the tablet surface. Do not use the tablet surface for any purpose other than drawing with your finger. Cleaning the tablet Clean the tablet's surface with a slightly dampened cloth. CAUTION: Do not clean pencil lines with a soft cleanser or pencil eraser.
PAGE 6
- END – Radio frequency emission notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 7
Scottsdale, Arizona, U.S.A. Mike Truscio Location Date Vice President of Engineering European Contact GTCO CalComp World Trade Center A-1300 Vienna -- Airport Austria Tel: Fax: + 43 1 7007 36450 + 43 1 7007 36458 European Union-emission directive This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility.