--- - I - Model Howto operateyour STEREO COMPACT DISC PLAYER CASSETTE TAPE RECORDER Q LOW HIGH Cf? QE -Z:S LEn NGHT CD~I ~ 0 I I 10 [ 7070C 7°70 100 010 I STEREO ~Pe'{;H':i.:::~ER '.COO (~IPLAYIPAUSE I (KI>I)«I» --SKIP-+ Important: Pleasereadtheseinstructionscarefully beforeoperatingthis unit. x-) .
SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS The lightning flash with arrowheadsymbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WHEN USING THIS EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: 1. READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING EQUIPMENT. CAUTION: 2.
. 11 1 12 hin he er. 1at ~a trio es. Ice om. 7°7° :ld. ler """""'TlCSTOI' .
DESCRIPTION OF CONTROLS AND FEATURES of the tape to another selection. This button also locks down for fast forward when other buttons are not depressed. 17. Review Button Pressing button while tape is playing permits quick back up of tape for reviewing a previously played portion. When other buttons are not depressed, this button locks down and rapidly rewinds tape back to the start. 18. Play Button Push to playa cassette tape. 19. Record Button Push to start recording on cassette tape. 20.
30. Carrying ard Handle 31. RemotelMicrophone Jack (REMOTE MIC) Provides connection for dual-plug microphone, with remote start-stop switch on microphone. ing ton 32.Aux Input Jack (AUX IN) This jack allows recording directly from a radio, phonograph, or other source. I~~_~_n ._n ... ._"~.~.I 33. Headphone jacks (HEADPHONES) Five 1/4" jacks for group listening. 34. Speaker Jacks (SPEAKERS) Use to connect external speakers (Min. 4Q, 7W).
I BEFORE YOU START TO ENJOY YOUR NEW STEREO PLAYER/RECORDER ABOUT CASSETTE TAPES You can use any standard cassette tapes with your unit. Every cassette tape has two tabs which you can remove to prevent erasure of recordings. If you wish to record on a cassette with the tabs removed, place a piece of tape over the tab holes. Operating on AC current This unit may be operated on regular 120-volt 60 Hz AC current. 5.6 feet (1.7 meter) AC cord fits snugly within open storage compartment on bottom of unit.
-- - - - - -- - ---I PRECAUTIONS FOR HANDLING COMPACT DISCS .. Lens Dirt, fingerprints, scratches and warps on a compact disc can cause noise. Observe the following precautions to keep your compact discs sounding their best. (1.7 Jnit. jbe I,be rew The lens which reads the digital signals stored on the surface of the compact disc is incorporated on the interior of the disc access cover. * To protect the lensfrom dust and other dirt, after removingthe disc, makesure to close the disc access door.
HOW TO PLAY A RECORDED CASSETTE TAPE 1. Set Function Selector to Tape mode. 2. Push down Stop/Eject button to open Cassette Compartment. 3. Insert a recorded cassette tape into slides of the open door of the Cassette Compartment. Close the compartment door. 4. Push Play button to start playing. If you are using a remote control microphone, be sure that the on/oft switch is turned to "on". 5. Adjust Volume Control. 6. Adjust Balance Control. 7. Adjust Tone Control knob to your preference. 8.
- HOW TO PLAY A COMPACT DISC NOTE: Do not operate the CD Player while carrying it or with it being The CD Player should be horizontal when playing. CAUTION: Do not push buttons too fast one after another malfunction. stood - it may Audible Search This feature can allow you to search either forward or backwardto find a desired location. In addition, low volume audio can be heard. To search forward, push and hold the Forward Search button (FF > ) during play.
. 811::... HOW TO PLAY A COMPACT DISC Repeat Playback To repeat all tracks on a disc: 1. Push Repeat button twice. Repeat Indicator (REPEAT ALL) lights up. ?\ (J il l ..o oX.. .,. 2. Push Play/Pause button to begin repeat playback. When the end of the last track is reached, the selection returns to track 1 for repeat play of all tracks. To release repeat function, push Repeat button. Repeat Indicator goes off. When the end of the last track is reached, the play stops automatically.
- HOW TO PLAY A COMPACT DISC To repeat a program playback: 1. Set your CD tracks desired music Toplay tracks into memory according to the procedure 1. Push in "Setting into memory". Random "RANDOM" at random: button. is displayed on the display. last 2. :ks. off. Push 3. Push 4. To Repeat button Play/Pause twice. Repeat Indicator (REPEAT ALL) 2. lights up. button. I. release repeat Push Play/Pause button.
HOW TO RECORD FROM CD PLAYBACK 1. Set Function Selector to CD mode. 2. Insert the compact disc in the CD Compartment carefully. 3. Push Stop/Eject button to open Cassette Compartment. 4. Insert a blank cassette tape into the Cassette Compartment. Close the compartment door. 5. Push Record button. The CD player will automatically start in a few seconds. 6. Push Stop/Eject button to stop recording after the CD player will automatically stop at the disc end.
- HOW TO RECORD WITH EXTERNAL MICROPHONE To record from auxiliary source: To record from sound sources such as a radio, tape player or other device through the AUX input jack, obtain a suitable connecting cord to hook-up the source with the AUX jack. Follow the recording procedures in the "HOW TO RECORD WITH EXTERNAL MICROPHONE". 1. Connect an external microphone. 2. Set Function Selector to Tape mode. 3. Push Stop/Eject button to open Cassette Compartment. 4.
ABOUT JACKS ANNOUNCEMENT Remote Microphone Jack Jacks for dual-plug external microphone (microphone not provided with the unit) are located on the front of unit. These are marked "REMOTE MIC". When inserting into jacks, push plugs in firmly until they are seated. With microphone installed, remote on/off switch will start and stop recorder in either play or record mode.
- NT - SPECIFICATIONS TYPE: DIMENSIONS (H x W x D): WEIGHT: Combo CD player/Audio tape recorder player 11-1/4" x 15-3/4" x 4" (285 x 400 x 100 mm) Approx. 8.15 Ibs (Approx. 3.7 kg) AMPLIFIER POWER OUTPUT: 7 watts RMS (per channel) 10% (THD) SPEAKER: 4" Round x 2 OPERATING CONTROLS: Volume, Tone, Balance, Function (CDlTape) REMOTE MIC. JACK: 1/8" (3.5 mm) x 1 AUX. INPUT JACK: 1/8" (3.5 mm) x 1 REMOTE PAUSE JACK: 1/10" (2.
r --.......-. III CD PLAYER/ CASSETTE TAPE RECORDER WARRANTY \ LIMITED 1 YEAR WARRANTY EIKI International, Inc. warrants this proouct when sold to the original purchaser from an authorized EIKI dealer, to be free from defective materials and workmanship for a period of 1 year. (Batteries and tape excluded). EIKI agrees to repair any defect or furnish a new or equal part through an authorized EIKI Service Dealer or Station.
