Owner`s manual

ManualsBrandsEight ManualsTV ReceiverHDR1

TASCAM HD-R1 1

Contents

Updates ............................................................... 1

New functions .................................................... 1

V1.10 additions ....................................................................................................1

V1.01 additions ....................................................................................................2

Maintenance items ........................................... 2

V1.10 changes ......................................................................................................2

V1.01 changes ......................................................................................................3

Known issues ..................................................... 3

V1.01 ..............................................................................................................................3

Checking the firmware version ....................... 3

Firmware update procedures .......................... 4

HD-R1

Release Notes

D01140220A

Always use the most recent rmware for this device.

Please visit the TASCAM web site at http://www.tascam.

com to check for the latest rmware.

Updates

V1.10 additions

Web Server Based Control function added. <

A browser on a computer connected to the unit by LAN

(Ethernet) can be used to send transport commands

and to edit various settings.

NOTE

The only browsers that can be used at this time are •

Internet Explorer 7 and 8, Firefox 3.5.6 or later and

Safari.

Network settings cannot be changed from the browser.

•

The internal clock can be synchronized with an SNTP <

server via the Internet.

NOTE

An Internet connection is necessary to use this •

function.

Take care when connecting the HD-R1 to a network

•

that is route-able from the public internet. Telnet

access requires no password, so the HD-R1 can be

controlled at any time by anyone who knows the IP

address.

The Daylight Saving Time function is only for North

•

America.

Restarting the unit is necessary after turning this

•

function on or off.

Playback from USB memory has been added.

NOTE

Recording to USB memory is not supported. Even •

if the “Media Speed Check” result is "Ok", delays

could occur during writing, which would stop

recording.

Use of a USB hub is not supported.

•

The USB memory must be formatted as FAT32 (or •

FAT16 if less than 2 GB).

Parts of the menu structure have been altered due to <

the addition of USB and SMTP client functions.

Serial control commands have been added.

track name command:•

You can designate a track name. This command only

works when the unit is stopped.

This only works for tracks that are in the currently loaded

media. Moreover, the full directory path of the track

name, excluding the media name, must be used.

When the

“Playback mode"

“Folder”

“Single”

this function only works with tracks in the currently

designated folder. The full path must be used in this

case as well. Example:

track name=AUDIO01¥TRACK001.WAV

Use a Query to show the current track name. (track name?)

delete track command:•

Use this command to delete the designated track. You must

reenter this command within 60 seconds for conrmation.

Examples:

delete track=USB:Track01.wav

delete track=CF:audio¥Track023.mp3

media command:•

Use this command to change the active media. This

function only works when the unit is stopped. Examples:

media=usb

media=cf

Use a Query to show the current media name. (media?)

format media command:

•

Use this command to reformat the designated media.

You must reenter this command within 60 seconds for

conrmation. Examples:

format media=usb

format media=cf

location command:

•

Use this command to designate the time at which the

current track should start playback. Example:

location=1

00. 00

New functions

Summary of content (4 pages)

PAGE 1
HD-R1 Release Notes Contents Updates. .............................................................. 1 New functions. ................................................... 1 Known issues . .................................................... 3 V1.01 ..............................................................................................................................3 Checking the firmware version........................ 3 Firmware update procedures........................... 4 V1.10 additions .....
PAGE 2
HD-R1 Release Notes V1.01 additions • HD-P2 Compact Flash media can now be used for playback. “H” appears on the LCD screen when such media is in use. • If a track that does not exist is selected using direct play (from an RC-SS20), the unit stops. Maintenance items V1.10 changes << When transmitting multiple tracks using FTP over LAN with a “Static” address, the set IP address would be changed automatically. This problem has been fixed. << The internal clock would become significantly inaccurate.
PAGE 3
HD-R1 Release Notes Known issues V1.01 • If any track names exceed eight characters, no more than 1000 tracks can be created in a folder. To record up to 1023 tracks in a folder, give all tracks names that are no more than eight characters. • The remaining time displayed during MP3 track playback is slightly inaccurate. This does not affect playback. • When sending multiple tracks by FTP using a static LAN, an error occurs in which the set IP address is automatically changed.
PAGE 4
HD-R1 Release Notes Firmware update procedures 1. Download the latest version of the firmware from the TASCAM website (http://www.tascam.com) to your computer. 2. Prepare a CF card formatted for use with the HD-R1. 3. Insert the CF card into the computer's CF card slot. If the computer does not have a standard CF card slot, use an external card reader, for example. 4. Copy the downloaded firmware to the root file of the CF card. 5. With the unit’s power off, insert the CF card into the CF card slot. 6.