Installation & Assembly

Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
ASSEMBLY INSTRUCTION
1
2
1
10057 WALL LAMP HERMITAGE
3
Turn off the electricity supply at the main circuit panel before
installing. Do not connect the electricity supply until your
luminaire is fully assembled and installed. Fix the crossbar (A) to
the wall by using wall mounting plugs and screws suitable to
your wall type.
Connect the 3 wires according to their colours. Brown is the live
wire, blue is the neutral wire, green/yellow is the earth wire.
Slide the lamp over the crossbar.
Place the bulbs and finally unpack the glass decorations
and screw them on to the frame carefully.
4