ER719 User Manual ER719 User Manual Ordering Information Model No. ER719 Name NFC Reader Writer Interface VCP(HID, RS232,RS485 optional) Phone 86-010-80218328 Email info@ehuoyan.com Web http://www.ehuoyan.com/ Version 1.
ER719 User Manual 1. Overview The ER719 NFC Writer is a PC-linked contactless smart card reader/writer developed based on the 13.56 MHz Contactless (RFID) Technology. It supports MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG213, NTAG216 and ISO 14443A compatible cards. ER719 use USB port to act as a virtual COM port. The proximity operating distance of ER719 is up to 5cm, depending on the type of contactless tag in use.
ER719 User Manual Dimensions Weight Cable length Color Interface Baud rate Operating Distance Supply Voltage Supply Current Operating Temperature Storage Temperature Operating Frequency RF Speed 114 mm (L) x 74 mm (W) x 16 mm (H) 70 g 1.
ER719 User Manual 9 E-Healthcare 9 E-Game 9 E-Government 9 E-Ticketing 9 Access Control 9 Network Login 9 Transportation 9 Loyalty Program 5. How to use Step1: Connect the cable to the ER719 connector J1(shown on above). Step2: Connect the USB connector to PC( or other smart host device, if RS232 or RS485 interface please reference your host’s connector) USB port( if you use a smart pad or phone, then you may need to use an OTG converter for it) . Shown as below. Version 1.
ER719 User Manual After power on the blue led will flash one time, then the buzzer will beep one time, at last the red led will light on, this means that the device is ready now. Step3: Now, you can run the program to send commands to the ER719 (if works on reader mode then you can open a text file to receive the data for test). You can run the eReader.exe or else App(base on the ER719 API) to communicate with the ER719.
ER719 User Manual 6. How to install USB driver? If works on USB interface then the host will install the USB driver itself, just step into the tips on the OS. If works on optional RS232 or RS485 interface then it needs no driver to be installed. If the VCP USB works on windows OS and can not find a USB driver for it, then you can open the folder “USB_Driver_Windows”, then you will find two installer programs shown as below. If the user’s OS is windows 32 bits, then click “CP210xVCPInstaller_x86.
ER719 User Manual the USB driver. On the next picture, please click “next step”. On the next picture, select “I accept this agreement”, next click “next step”. Version 1.
ER719 User Manual On the next picture, click “Finish”, then the USB driver install fully. How to find out which communications port the operating system has assigned to Version 1.
ER719 User Manual the USB driver? Windows XP--The path is: Start=>Control Panel=>System(you might need to set your Control Panel to ‘Classic View’)=>Hardware=>Device Manager=>Ports(COM & LPT) Windows 7 and above versions--The path is: Start=>Control Panel=>Device Manager(you might need to set your Control Panel to ‘Classic View’)=>Ports(COM & LPT) Note: If the COMX exceed COM10, please change it between 1 to 8, for example, it shows COM12, then you can change it into COM3. Version 1.
ER719 User Manual 7. Troubleshooting No. 1 2 3 4 5 fault solution No sound when power on If the red led is not light, plug the USB again or plug it into another USB port or supply correct power for it. Red led not light when Same with above. power on Beep all the time when Reconnect or repower it. power on Can not read the card No card on the ER719 antenna area or the card maybe bad or it is not a supported card. Can read card SN, but You have not the right authenticated keys.
ER719 User Manual FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.