成都四相致新科技有限公司 EH100606A01-J Social Distancing ID Card User Manual 1
成都四相致新科技有限公司 1. Introduction............................................................................................ 3 1.1 Product Introduction .......................................................................................... 3 1.2 Apperance............................................................................................................... 3 1.3 Dimension ............................................................................................................... 4 1.
成都四相致新科技有限公司 1. Introduction 1.1 Product Introduction System is a set of ranging system based on Ultra-Wideband Technology, which has the characteristics of high precision, large capacity, strong multi-path resistance and low power consumption. Cards worn on the person consistently monitor the distance to the surrounding cards. When the distance is less than the safe value, an alarm signal will be generated immediately.
成都四相致新科技有限公司 Six View 1.3 Dimension 1.
成都四相致新科技有限公司 Card Lanyard(Optional) Charging Cable 1.
成都四相致新科技有限公司 6
成都四相致新科技有限公司 1.6 Specifications Specification Model:EH100606A01-J Dimensions:86×55×6mm Power Supply Port:micro-USB Charging Time:≤2h Duration:≥10h Low Battery Reminder:YES Key Interaction:YES Sound:YES Vibration:YES LED:YES Built-in RFID:ISO14443A 13.
成都四相致新科技有限公司 Working Temperature:-20℃~60℃ Storage Temperature:-20℃~85℃ Working Humidity:0~95% No condensation Materials:PC+ABS Battery Type:Lithium Polymer Battery Battery Capacity:500mAh Charge/Supply Volcarde/Current:5V/270mA Location wireless system:802.15.4_2011UWB Positioning Antenna Gain:with 2.6dBi gain Ranging Method:TOF Location Typical Transmit Power:-41.3dbm/MHz Wireless Communication System:802.15.4_ 2.4GHz Communication Frequency Band:IEEE802.15.4 11~26 Communication Antenna Gain:2.
成都四相致新科技有限公司 Typical Transmission Power of Communication:6.10dbm 4.074mW Line-of-Sight Project Coverage Distance:30m Acceleration sensor: Triaxial 2. Card Usage 2.1 Way to Wear 2.2 RFID Introduction The card (with built-in ISO14443A 13.56m IC card) has only front-facing card reading function.
成都四相致新科技有限公司 2.3 Charging Instruction 2.3.
成都四相致新科技有限公司 2.4 Interactive Instructions 2.4.1 Operating Instructions Power On: If product is in the power-off state, press and hold the button for more than 3 seconds. When you hear the buzzer and see the LED flash, it means product is power-on successfully. Power Off: If product is in the power-on state, press and hold the button for more than 3 seconds. When you hear the buzzer and see the LED flash, it means product is power-off successfully.
成都四相致新科技有限公司 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. FCC ID:2AWQO-EH100606A01-J NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
成都四相致新科技有限公司 this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction According to regulatory requirements: technical requirements applicable to all UWB devices Do not use UWB devices for toy operations, and do not operate on airplanes, ships, or satellites.
成都四相致新科技有限公司 ForThink Technology Co., Ltd Address:No. 898, Baicao Road, High-tech West Zone, Chengdu :hg.ehighuwb.