User's Manual

ManualsBrandsEggtronic ManualsElectronicsTriple coil embedded wireless charging system

USER MANUAL

EGG190098

Triple coil embedded system

Product overview

The “Triple coil embedded system” is a wireless charging module designed to be

integrated in any surface. Using the provided adhesive mounting tape, it can be

installed under slim surfaces (maximum 5 mm thickness). No need for screws:

the installation process is quick and easy, and the charger can be removed

without damaging the top. The “Triple coil embedded system” is Qi certified

and works with any Qi-certified device. A triple-coil system ensures high

positioning freedom. Maximum power delivered is 5W.

How to use

1. Remove the layer on the adhesive mounting tape.

2. Apply under surface. Works with most non-metal surfaces.

Model: EGGTX025

Summary of content (11 pages)

PAGE 1
USER MANUAL EGG190098 Triple coil embedded system Model: EGGTX025 Product overview The “Triple coil embedded system” is a wireless charging module designed to be integrated in any surface. Using the provided adhesive mounting tape, it can be installed under slim surfaces (maximum 5 mm thickness). No need for screws: the installation process is quick and easy, and the charger can be removed without damaging the top. The “Triple coil embedded system” is Qi certified and works with any Qi-certified device.
PAGE 2
3. Connect the cable to the power source. 4. Lay down any Qi-enabled smartphone on the wireless charging area to start charging. Features ● Certified with WPC Qi 1.2.
PAGE 3
Dimensions: 61 x 103 x 9 mm (2.40 x 4.05 x 0.35 in) | Weight: 2 pin (V01): 87g (0.19 Ibs); 3 pin (V02): 90g (0.20 Ibs) | Cable length: 65 cm (1.47 ft). Electrical specifications Input Min 11.4V Max 14.5V | Input current Max 1A | Output wireless 5W | Average Sstandby mode consumption ~ 25 mA | Storage temperature -10°C / 70°C | Operating temperature 0°C / 40°C | Operating frequency 115 - 205 kHz.
PAGE 4
PAGE 5
Item Part number Description Material Quantity EGGM200001 - Bottom Cover ABS 1 Number 1 V01R01 - Shell bottom 2 EGGTX025_S01G01 PCB Assembly FR4 1 3 EGGM200002 - Upper Cover ABS 1 EGG190098 - E01 - Wireless charging Copper wire + ferrite 1 TripleCoil coil A24 EGG190098 - E02 - 2 wires cable Copper wire 1 EGG190098 - C01 - Adhesive tape - White ash Acrylic 1 Adhesive OCS5030GP EGG190098 - E03 - MOLEX Nylon 1 Connector 430250200.
PAGE 6
External Radius and Chamfer Height 0.5 up to 3 ±0.2 3 up to 6 ±0.
PAGE 7
Item Part number Description Material Quantity EGGM200001 - Bottom Cover ABS 1 Number 1 V01R01 - Shell bottom 2 EGGTX025_S01G01 PCB Assembly FR4 1 3 EGGM200002 - Upper Cover ABS 1 EGG190098 - E01 - Wireless charging Copper wire + ferrite 1 TripleCoil coil A24 EGG190098 - E02 - 3 wires cable Copper wire 1 EGG190098 - C01 - Adhesive tape - White ash Acrylic 1 Adhesive OCS5030GP V01R01 - Shell top 4 5 Cable 6
PAGE 8
7 EGG190098 - E05 - MOLEX Nylon Connector 436450300. Polarization: PIN1: 12V - Red | PIN2: signal White | PIN3: GND Black Genera l tolererance Nominal lengths [mm] table 0.5 up to 3 ±0.1 3 up to 6 ±0.1 6 up to 30 ±0.2 30 up to 120 ±0.3 External Radius and Chamfer Height 0.5 up to 3 ±0.2 3 up to 6 ±0.
PAGE 9
Safety information Please read this safety information carefully before using the product to prevent injury to yourself or others and damage to your device. Please keep this manual for future reference. ● Do not damage the cable. Doing so may cause electric shock or fire. ● Keep the product away from hot surfaces and sharp corners. ● Do not carry or drag the product by the cable. ● Do not use the product if one or more of its components are damaged or faulty.
PAGE 10
● Children may choke on small parts. If children use the device, make sure that they use it properly. Warning: choking hazard. Keep out of the reach of children. ● If you notice strange smells or smoke coming from your device, stop using it immediately. Continuing to use the device may result in fire or explosion. ● Do not use the device for anything other than its intended use. The device may malfunction or may cause an electric shock or fire. ● Never dispose of the device in a fire.
PAGE 11
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.