How-To Guide

ManualsBrandsEggtronic ManualsElectronicsTriple coil embedded wireless charging system

FEATURES

• Compatible with WPC Qi 1.2 wireless charging standard

• Designed for integration: a completely hidden solution

• Industrial adhesive mounting tape, no need for screws

• Quick and practical installation process, easy charger

removal without damaging the top

• Maximum power 5W

• Triple coil free positioning technology allows wider charging

area compared to standard solutions

• Designed to be installed under surfaces with maximum

thickness of 5 mm (0.19 in)

www.eggtronic.com | supportb2b@eggtronic.com

GENERAL DESCRIPTION

The “Triple coil embedded wireless charging system” is a wireless charging module designed to be integrated in any surface.

Using the provided adhesive mounting tape, it can be installed under slim surfaces (maximum 5 mm thickness). No need for screws: the installation process is

quick and easy, and the charger can be removed without damaging the top. The “Triple coil embedded wireless charging system” embeds a Qi-compliant

chipset: it is compatible with the WPC Qi 1.2 wireless charging standard, and works with any Qi-compliant device. A triple-coil system ensures high positioning

freedom.

Triple coil embedded wireless charging system

HOW TO USE

1. Remove the layer on the adhesive mounting tape

2. Apply under surface. Works with most non-metal surfaces

3. Connect the cable to the power source

4. Lay down any Qi-enabled smartphone on the wireless charging

area to start charging

Summary of content (7 pages)

PAGE 1
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com Triple coil embedded wireless charging system F E AT U R E S • Compatible with WPC Qi 1.
PAGE 2
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com S P E C I F I C AT I O N S Physical Specifications Dimensions 60 x 103 x 8.5 mm (2.36 x 4.05 x 0.39 in) Weight 85 g (0.19 lbs) Cable length 45 cm (1.5 ft) Electrical Specifications Input Min 11.4V Max 12.
PAGE 3
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.
PAGE 4
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com A P P E N D I X A – C L I M AT I C T E S T 1. CEI EN 60068-2-1: Cold Test description The sample stored at ambient temperature, is introduced into the climate chamber, whose temperature is the same of ambient temperature (storing temperature: 25°C). Then the temperature lowers at -10°C and the sample is maintained at this temperature for 16h. Humidity must be 0%.
PAGE 5
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com 100 %rh 150 °C 100 °C 50 %rh 50 °C temp hum 0 °C 1h 0 %rh 16h 3. CEI EN 60068-2-14: Temperature change Test description The sample stored at ambient temperature, is introduced into the climate chamber, whose temperature is the same of ambient temperature (storing temperature: 25°C). Then the temperature decreases at -10°C (with a variation velocity of 3±0.6°C/min) and the sample is maintained at this temperature for 3h.
PAGE 6
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com 4. CEI EN 60068-2-30: Wet heat, cyclic (12h+12h) Test description The sample stored at ambient temperature, is introduced into the climate chamber, whose temperature is the same of ambient temperature (storing temperature: 25°C). Then the temperature increases at 55°C (in a period not less than 3h) and the sample is maintained at this temperature for 11h45’ at 93%rh and then for 15’ at 95%rh.
PAGE 7
w w w.e g g t ro n i c .c o m | supportb2b@eggtronic.com Figura 2:Light load charging 3. Light load charging Figura 2:Light load charging Figura 3: 5W charging Figura 3: 5W charging 3. 5W charging FCC Warning This device complies with part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.