Specification Sheet
15
Information and product specications contained in this document are subject to change without notice. REV 2020-01
Specications
Tankless Electric Water Heater
ProSeries
™
For Single Point-of-Use or Multiple Applications
Applications
•
Handwashing 0.5-2.2 GPM
•
Standard Hand Sink 0.5 GPM
•
Kitchen Sink 2-2.5 GPM
•
Mop Sink 2-4+ GPM
•
Dishwasher 1-2 GPM
Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards
Performance Features
•
Instant, consistent and endless hot water
•
Protected internal temperature control
•
Copper immersion heating elements with brass top increases
durability and are threaded for easy replacement
•
Simple Installation
•
Internal temperature control adjustable in increments of 1°F
•
8-13kW units: Temperature range 80°-140°F
•
18-36kW units: Temperature range 80°-180°F
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax ProSeries model number
PR_______________.
Unit shall have copper clad immersion heating element(s) with
brass terminations for increased durability. Temperature control
and display to be internal to the unit, and adjustable in 1°F
increments with a range of 80°-140°F; 80°-180°F on 18-36kW
units. Display shall be capable of displaying setpoint temperature
in Centigrade or Fahrenheit temperature scales. Unit shall utilize
a ow meter with a 0.3 GPM activation point and manage power
based on actual ow rate and inlet temperature. Values should be
processed 60 times per second. Unit shall be WQA certied lead
free, certied to UL499 and CSA-C22.2 No. 64.
Eemax Inline Flow Regulator
•
Enhanced outlet temperature control
•
Install on the outlet side of the heater
•
Limit maximum volume to the specied ow rate to ensure
exiting temperature is within an acceptable range
•
Flow Regulators for ½" and ¾" plumbing connections
•
Restriction range: 1.0 to 5.0 gallons per minute
EEMAX PART NUMBER
GPM RATING OF
INSERTS PROVIDED
CONNECTION SIZE
IFR 1-2
1.0, 1.5, 2.0 1/2" NPT
IFR 3-4
2.0, 3.0, 4.0, 5.0 3/4" NPT
PR008240/PR011240/PR13240 PR018240
PR024240/PR027240 PR036240
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
Inlet Water Temperature
40°F 50°F 60°F 70°F
PR008240
IFR 1-2 1.0 1.0 1.0 1.5
PR011240
IFR 1-2 1.0 1.0 1.5 2.0
PR013240
IFR 1-2 1.0 1.5 2.0 2.0
PR018240
IFR 3-4 2.0 2.0 2.0 3.0
PR024240
IFR 3-4 2.0 2.0 3.0 4.0
PR027240
IFR 3-4 2.0 3.0 4.0 5.0
PR036240
IFR 3-4 3.0 4.0 5.0 5.0
Eemax Inline Flow Regulator Suggested Sizing Guide
*
*Selection based on inlet temperature and an outlet temperature setting of 105°F
Inserts Included
IFR 1-2
2.0 GPM
1.0 GPM 1.5 GPM
1/2" NPT
Inserts IncludedIFR 3-4
2.0 GPM 3.0 GPM
4.0 GPM 5.0 GPM
3/4" NPT