Specification Sheet

Information and product specications contained in this document are subject to change without notice. REV 2020-01
Specications
Tankless Electric Water Heater
Series Two
™
, "TC"
Staged Models (Two Heating Modules) with Thermostatic Control
Applications
• Single or multi-xture
• Commercial/Industrial
• Adjustable temperature setting with +/–1°F temperature stability
• Solar backup with FS option
Performance Features
• Turns on in stages based on hot water demand
• On demand hot water
• Continuous hot water. No storage capacity to run out
• Reduces installation cost and material. No T&P relief valve
needed (check local codes) or venting
• Easy installation with integral 3/4" NPT ttings
• Cut energy waste. Flow switch activates heater only on demand
(no standby heat loss)
• Two glass-ber reinforced heater bodies and nichrome
elements – a unique, patented ow path ensures optimum heat
transfer and extended element life
• Warranty, ve (5) years limited on leaks, one (1) year parts
• Field serviceable replaceable cartridge element
• Unit mounts on wall
• High temperature limit switch
Optional Features
• Factory set ambient to 180°F (FS)
• Multi lavs 0.3 turn on. Staged up to 4 lavs 105°F-110°F temp
setting (ML)
• Sanitation 180°F (S)
• N4, N4X (304SS) enclosures
Product Specications
Dimensions: 10.25" x 10.75" x 4.5"
Weight: 10.5 lb
Cover: Enameled steel
Color: White
Element: Dual replacement cartridge inserts
Thermostatic control (+/-1°F) accuracy at steady
state
Fittings:
3/4" NPT ttings at bottom of unit
Min. Dynamic Operating Pressure: 40 PSI
Max. Dynamic Operating Pressure: 150 PSI
UL listed le number: E86887
U.S. Patent #'s: 4,762,980 and 4,960,976
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax Series Two model
number EX_________________________.
Heater shall have two heating modules. Element shall be
replaceable cartridge insert. Unit shall have a replaceable lter
in the inlet connector. Heater shall be tted with 3/4" NPT water
connections. Maximum operating pressure of 150 PSI. Hot water
storage tanks prohibited. Unit shall be Eemax or approved equal.
NOTE: Refer to rating chart for product information.
Enclosure to be tted with the following features:
_____ FS
Factory set ambient to 180°F
_____ ML Multi lavs 0.3 turn on. Staged up to
4 lavs 110°F temp setting
_____ S
Sanitation 180°F
_____ N4 NEMA 4 steel cabinet with powder coat nish
_____ N4X NEMA 4 stainless steel, corrosion-resistant cabinet
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
In USA
Assembled