User Manual of Face Recognition Temperature Measuring Terminal I、Model DM1071-T ____________ II、Product specifications Basic parameters Identification requirements Soc High-performance AI SoC (4-core A7 + NPU + DSP) Memory 1GB DDR3 Storage EMMC 8GB Recognize height 1.2 ~ 2.2 meters, adjustable angle Recognition distance 0.5 ~ 1.2 meters Face angle 30 degrees left and right, 30 degrees up and down Face recognition accuracy 99.
Size 7 inch LCD screen Resolution 600*1024 Resolution 2 million Type 120DB ultra-wide dynamic binocular camera Fill light Built-in fill light, no fear of backlight, dark light environment Power supply DC 12V Internet 1 RJ45 10M / 100M adaptive Ethernet port USB 1 USB 2.
IV、Installation method Wall-mounted: 1. 2. 3. Make positioning marks on the wall according to the positions of the 6 fixing holes of the wall-mounted bracket A; After drilling the holes with an impact drill, fix the bracket A with expansion screws; Use the built-in screws to replace the host bracket B with a wall-mounted one, and clip the host buckle B to the wall bracket A; Use the built-in screws to fix the brackets A and B together at C and connect the power supply.
Upright: 1. 2. 3. 4. According to the gate type and actual use scene, make a hole at the appropriate position of the gate, the reference diameter is 34.2mm; Unscrew the nut A at the bottom of the column to separate the entire host and cables; From above the holes, first pass the cables through the holes one by one, and insert the posts into the holes, and then from below the turnstile, pass the cables through the nut A one by one; Tighten the nut and connect the power supply, Wiegand and light.
1. Remove the default column bracket, that is, remove all the screws at ABCD in the left picture to separate the column bracket from the host; 2. Take out the desktop support in the right picture, corresponding to the original ABCD position in the left picture, and tighten it with screws; 3. It can be placed on the desktop and can be moved at will. It can be used when connected to the power supply.
VI、Warranty Card ----------------------------------------------------------------------------------------------------------------------------Warranty Card Warranty instructions note: 1. Warranty certificate Please keep this warranty card properly. If the warranty card is lost, it will not be reissued. Please be sure to keep the invoice or relevant valid proof of purchase and present it when the machine fails to be repaired.
VII、Warning FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.