Office +1 Snelstartgids 11-2020 / v1.
I Korte samenvatting en herinnering 1. U kunt alle ondersteunende documenten, video's en programma's vinden via: www.edimax.com/edimax_pro/download/Office1-2-3 2. Voor de complete introductie van het Office 1-2-3 systeem, ga naar de onderstaande link: http://office123.edimax.com 3. Er kan zich slechts een Office 1-2-3 master unit in het netwerk bevinden. De rest zijn Office +1. 4.
II Productinformatie II-1 1 Inhoud van de verpakking 3 2 6 5 4 7 1. 2. 3. 4. 8 5. 6. 7. 8.
II-2 Systeemvereisten - Bestaande kabel/DSL-modem & router.
II-4 LED-status LED kleur Blauw Bruingeel Uit II-5 LED-status Aan Langzaam knipperend Snel knipperend Aan Knipperend Uit Beschrijving Het access point staat aan. Bezig met upgraden van de firmware. Terugzetten naar fabrieksinstellingen. Start op. Fout. Het access point staat uit. Resetten Als u problemen ondervindt met uw access point dan kunt u het apparaat terugzetten naar de standaard fabrieksinstellingen. Hierdoor worden alle instellingen teruggezet naar standaard. 1.
III Toevoegen van Office +1 AP naar Office 1-2-3 Deze snelle set-up helpt u om de Office +1 AP toe te voegen aan uw bestaande Office 1-2-3 high-speed draadloos netwerk. 1. Identificeer de PoE switch die verbonden is met het bestaande Office 1-2-3 netwerk. 2. Sluit de Office +1 AP aan op de PoE switch met behulp van een ethernetkabel.
IV Vervangen van de Master AP NB: Er kan maar EEN Master AP in uw netwerk zijn. Gebruik deze procedure alleen als uw Master AP defect is en vervangen moet worden. Dit onderdeel is een stap-voor-stap procedure die u begeleidt bij het vervangen van de originele Master AP, waarbij u eerst de firmware van de Master AP bijwerken gevolgd door het herstellen van de eerder opgeslagen systeeminstellingen.
2. Zoek uw Office +1 AP door op “Ontdekken” de IP finder. 3. Klik op het IP-adres van het access point dat u Master wilt maken, en ga naar de web user-interface.
Als u de webpagina binnengaat, moet u gevraagd worden om uw gebruikersnaam en wachtwoord in te voeren (standaard gebruikersnaam: admin, wachtwoord: 1234) om verder te gaan: De web gebruikers-interface wordt hieronder weergeveven: 8
4. Klik op het pictogram "Systeeminstellingen”. Upgraden van Firmware 5. Scroll naar de onderkant van de pagina om de "firmware upgrade”te vinden. Als u de nieuwste firmware niet heeft, ga dan naar de onderstaande URL om deze te downloaden: www.edimax.com/edimax_pro/download/Office1-2-3 Lokaliseer de Master firmware en klik op het download-pictogram om te downloaden. 6. Klik op "bestand kiezen”om het bestand van de master firmware te selecteren. 7.
Een herinnering wordt weergegeven, klik op “OK” om verder te gaan. Het systeem is aan het updaten, een moment geduld... 8. Als u de webpagina binnengaat, wordt u gevraagd om uw gebruikersnaam en wachtwoord in te voeren (standaard gebruikersnaam: admin, wachtwoord: 1234) om verder te gaan: 9.
Er worden meer systeemberichten weergegeven, klik op “OK” om verder te gaan. Het systeem is aan herstarten, een moment geduld... 10.
11. Klik op het pictogram "Systeeminstellingen”. Instellingen terugzetten 12. Scroll naar beneden om de "Firmware Upgrade” te vinden. 13. Klik op de “Bestand kiezen”knop om het bestand met de eerder opgeslagen instellingen te vinden op uw computer. 14. Klik op “Herstellen” om uw bestaande instellingen te vervangen. Als uw instellingen versleuteld zijn met een wachtwoord, vink dan het vakje “Open bestand met wachtwoord” en voer het wachtwoord in het volgende veld in.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment Directive. Equipment: AC1300 DBDC Ceiling-mount AP Model No.: Office +1 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EMF : EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) : Draft EN 301 489-1 V2.2.1 (2019-03) Draft EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.