AR-7188WnA Quick Installation Guide 04-2014 / v1.
COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Multi-Language Quick Installation Guide(QIG) on the CD Čeština: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD Español: Incluido en el CD el G.R.I. en Español. Français: Veuillez trouver l’français G.I.R ci-joint dans le CD Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse Q.I.G.
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package and contact your dealer to claim the missing item(s): zADSL2+ router z12V Power adapter z1 meter RJ-45 Ethernet cable z1.8M RJ-11 telephone line x 2 zQuick installation guide zCD containing setup wizard, user manual & multi-language QIG zSplitter (Annex A) z5dBi Antenna System Requirements Recommended system requirements are as follows.
LEDs Color Green Red ADSL Green Internet Green Red LAN1~4 Green Green WPS Green Status ON OFF ON ON SLOW BLINK FAST BLINK ON BLINK OFF ON ON BLINK OFF On Blinks Off Off Blinks Description Powered on Powered off ADSL broadband initial self-test failed or upgrading firmware ADSL line is synchronized and ready to use ADSL synchronization failed ( Please refer to Note 1) ADSL negotiation is in progress.
Items Description Power ON/OFF 12V Power connector Wireless LAN ON/OFF (Press the button gently and let go after 1 second to enable WLAN function, and press the button gently and let go after 1 second to disable.) WPS ON/OFF (Press the button gently and let go after 1 second to enable WPS WLAN function, and press the button gently and let go after 1 second to disable.
A. Hardware Installation GETTING STARTED Step 1: Connect the ADSL line Connect the Line interface of the device to the Modem interface of a splitter using a telephone cable. Connect a telephone to the Phone interface of the splitter using a telephone cable. Connect the Line interface of the splitter to your existing, incoming line. The splitter has three interfaces: Line: Connect to a wall phone jack (RJ-11 jack). Modem: Connect to the ADSL jack of the device. Phone: Connect to a telephone set.
Step 4: Check the ADSL LED status Please check the ADSL LED on the front panel. This light indicates the status of your ADSL broadband through your telephone line. If the light is on, you can continue setup. However if the light is flashing, there is no broadband line detected. Please call your Internet Service Provider (ISP) and inform them about the flashing ADSL light to resolve the issue.
3. Locate the “Network Connections” icon and double-click to open network connection settings. 4. Select the “Local Area Connection” icon and right-click it to open the sub-menu, then select “Properties”. 5.
6. Ensure that “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected and then press “OK”. B. Internet Connection You can configure the router by running the setup wizard on the CD-ROM included in the package contents. The wizard enables you to configure your Internet connection, upgrade the firmware and change the router’s password. When you start the setup wizard, you will see the following screen.
Alternatively, if you lose the CD-ROM or prefer a web based setup, you can login to the ADSL router using Internet Explorer, and configure the router from there using the web-based interface. Please follow the instructions below: 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “Enter”. 2. The login screen below will appear. Enter the default username “admin” and default password “1234” and click “OK”. 3. You will arrive at the system status page as shown below.
4. In the navigation bar across the top of the screen, click “Quick Start”. The Wizard page of the web-based interface allows fast configuration of the Internet connection and other parameters. Please refer to the user manual for detailed information on these parameters. Click RUN WIZARD, there will pop up a new page as shown in the following figure appears.
Enter the required information on each page of the quick start and click “NEXT” until the quick start is complete. Note: Please refer to the User Manual on the included CD-ROM for more detailed information regarding configuration and Internet connection type.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. French: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1999/5/ES, 2009/125/ES.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Council directive (1995/5/EC, 2006/95/EC). Equipment : Model No. : N150 Wireless ADSL Modem Router AR-7188WnA The following European standards for essential requirements have been followed: Spectrum : EMC : ETSI EN 300 328 : V1.7.1(2006-10) EN 301 489-1 V1.9.2(2011-09) EN 301 489-17 V2.1.
15
