IC-3011DP Quick Installation Guide (QIG) V1.
Table of Contents I. Product Information .............................................................................. 3 I-1. I-2. I-3. I-4. I-5. Package Content .....................................................................................................................3 LED Status(Gateway)...............................................................................................................3 LED Status(Camera) ..............................................................................
Package Contents Camera Gateway Antenna Power Adapter Ethernet Cable Velcro & Silicon Band QIG Hook Template LED Status(Gateway) LED Color Green LED Status Description Quick Flashing Paired camera data has been cleared. Quick Flashing The gateway is restarting. Slow Flashing Pairing is activating. Green On The gateway is connected to the local network. Quick Flashing The gateway is transferring data. Orange On The gateway is connecting to internet.
LED Status(Camera) LED Color LED Status Green (Status) On Orange (Status) Red Description The camera is in use. Slow Flashing Pairing is activating. Quick Flashing Success pairing (Blinks for 5 seconds). Slow Flashing PIR event trigger. Slow Flashing Battery low power warning.
Pairing The “Pair” button is a quick and easy alternative to establish a secure wireless connection between your camera and gateway. 1. Press and hold the Pair button on your gateway for 2 seconds to activate pairing. The pair button for gateway - Hold 2-4 seconds for pairing to activate. - Hold more than 5 seconds to clean all paired camera data. 2. Within 30 seconds, press the “Pair” button on the camera for 1 – 2 seconds to activate pairing.
Reset If you experience problems with your network camera, you can reset the camera back to its factory default settings. This resets all settings back to default. 1.Press and hold the Reset button found on the back panel for at least 10 seconds. Release the button when the …LED is flashing quickly into “green”. 2. Wait for the gateway to restart.
Gateway Installation Follow the instructions below to ensure your camera is properly connected and ready for setup. 1. Screw on the included antenna to the product’s gateway unit. 2. Connect the power adapter to the gateway and to a power supply. 3. Use an Ethernet cable to connect the gateway’s AP/ Router’s LAN port, as shown below. LAN port to a Wireless For cloud service, ensure your Wireless AP/ Router can access to the internet. 4. Wait a moment for the camera to power on.
Camera Installation 1. For camera power supply, you can choose battery powered or USB power bank, as shown below.(Figure A and Figure B) For better performance, please use Please turn the switch “off” Alkaline/rechargeable batteries. before plugging the USB (Heavy duty is not recommended!) power source. (Figure A, Battery installation) (Figure B, USB Power bank installation) 2. The door gap must be more than 2.5mm as shown below.
Camera Installation 3. Hook on the metal door. With 5 strong magnets, you can easily install and adjust on a metal door without any tools. 4. Hook on the nonmetal door Fix and stick with the “Hook Template” and the “Velcro” on the nonmetal door as shown below for the “assembling diagram”.
Camera Setup – Using Mobile App 1.Use a smartphone or tablet to search, download and install the AcelinkView II app from Google Play or the Apple App Store. 2.For iOS/Android users, go to Wi-Fi settings and connect to your Wireless AP/ Router’s SSID (ensure the camera gateway connected via LAN, see Step.3 on Page.7), before opening the AcelinkView II app.
Camera Setup – Using Mobile App 3. First time running the APP, click “+” icon to add camera (Figure C) and you will see the camera IP address on the list which has connected on your local network(Figure D). (Figure C, add camera) (Figure D, camera list) 4.Enter the password (The default password is 1234), it will pop up a message if added successfully, as shown below. Reminder: Outdoor and other area where the camera is exposed to special lighting will have some color shifting.
Camera Setup –Mobile App Instruction 1.Single click : Show/Hide quick buttons, camera name and other settings. Double click : Zoom in/ out video image. 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
