Wireless Signal Booster User’s Manual
COPYRIGHT Copyright © 2004/2005 by this company. All rights reserved.
Warning Statement: Federal Communication Commission Interference Statement Federal Communications Commission (FCC) Requirements, Part 15 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
Hardware description:
Hardware installation (For Certified Wireless Router): 1) Remove the original antenna from the certified wireless router. To remove the antenna, twist the base of the antenna in a counter clockwise motion until the antenna is completely removed. 2) Connect the signal booster to the certified wireless router using the included color coded connector cable.
4) Power on the signal booster by connecting the power adapter to the DC plug port. Product specifications Network/Operating Range: IEEE 802.11b/ IEEE 802.11g WLAN Standard - 2400 - 2500 MHz Antenna: 2 dBi Frequency Response: +/- 1 dB Output Power: US Version @ 500mW setting, 802.11g = 20-21dBm, 802.11b = 25-26 dBm Input Power: 8-18 dBm Max. Receiver Gain: 10-13 dBm, 12 dBm Typical Noise Figure: 3.
Glossary Ethernet - A networking standard using cables (Category 5) to create a network. Network Adapter - Also known as a NIC (Network Interface Card). Used to provide PC’s or laptops with an Ethernet port or wireless access to the network. Broadband Modem - A device that allows broadband connection to the internet. Broadband connections include speeds faster than 56k (dial up modem speed). The two most common types of Broadband connections are DSL and Cable.
