English MP221 Français Multimedia Speaker User's Manual Please read this manual carefully before operating the speaker system
Introduction Congratulations on the purchase of the Edifier MP221 speaker system. With the right care and attention, you can enjoy many years of high-quality stereo and audio performance. Before operating the system, please read this manual fully to obtain the best results from your new product.
Unpacking the Contents Please check the model number marked on the gift box. Please contact the seller as soon as possible if you find the speaker to be the incorrect model or has sustained shipping damage. MP221 packing list: 1 x Speaker (With stand) 1 x USB-DC converter cable 1 x Audio Cable with 3.5mm Stereo headphone plugs on each end 1 x User's Manual USB-DC converter cable.
Parts and function description Front and rear view of the speaker (figure a, b) : Left channel Power switch speaker Power indicator Volume Right channel speaker adjust DC input Signal input DC 5V LINE IN MP221 MULTIMEDIA SPEAKER Figure a: Front View Bass reflex port EDIFIER ENTERPRISES CANADA INC Battery holder MADE IN CHINA Figure b: Rear View Battery installation: Follow the arrow mark to slide off the cover of battery holder and install four AAA batteries into the compartment.
Speaker Connection Instructions Operation illustration: Stand Speaker Computer Sound Card DC input (center-positive +) Connect to computer USB port English Note: Music may distort at maximum volume when the system is powered by the USB cable. Please check the Troubleshooting Guide for details.
Specifications Specifications: Power output: RMS 0.8Wx2 (THD=10%, fo=1KHz) Signal to noise ratio (Amplifier): 80dBA Amplifier distortion: THD+N<0.5% Input impendence: 10K Ohm Input sensitivity: 250 50mV Speaker driver: 1.5 inch (40mm), magnetically shielded, 8 Ohm. Volume control type: Potentiometer Power Input: DC 5V Dimensions: 200(W)x72(H)x25(D) mm (not including speaker stand) Weight: approx. 0.
Troubleshooting Guide System does not function at all: Check if the AC power adapter is plugged into a power outlet, which has been switched on. (AC power adapter is optional in some world markets). Check if all speaker cable connections are correct. Check if your external sound source equipment is working correctly. Sound from only one driver: 1. Check if all speaker cable connections are correct. 2.
Copyright 2006 All Rights Reserved. Manual Edition 1.0, Mar. 2006 Printed in China www.edifier.com EDIFIER ENTERPRISES CANADA INC.