MF5P Portable Voice Amplifier
■ Box contents Amplifier USB charging cable Microphone Strap User manual Note: Images are for illustrative purposes only and may differ from the actual product.
■ Illustration Left view 1. Mode switch button 2. Previous track 3. Play/pause 4. Next track 5. Recording button 6. AUX input 7. Microphone input 8. Turn on/off / volume control 9. Charging port 10. microSD card slot 11. USB connector 12.
User guide Charge the amplifier Battery level: The red light will flash rapidly along with prompt tone when the amplifier is at low battery level. Charging: Insert the USB charging cable into the charging port (DC IN) for charging, and the red light will be steady lit during the charging. Charging completed: The red light will turn off, please unplug the adapter and charging cable. Note: Charging this product outdoor or at high temperature may be disabled for charging protection.
How to operate the microphone: When wearing the microphone, please align its front side with mouth to speak, and the voice will be loud and clear without whistling sound. When speaking, wrap the microphone with black cotton to filter other interfering sounds. If does not speaker toward the front side of the microphone, the voice may be small or whistling sound may occur, etc. If amplifies sound while playing music, press and hold the " " button for 3 seconds to switch the Microphone Priority function.
Recording mode Preparations for recording of wired microphone: 1. Insert the microphone into the "MIC" port; 2. Insert a microSD card or an USB flash disk into the corresponding slot (recording files will be saved in MP3 format); 3. Switch to AUX mode or Bluetooth mode. Recording procedures: 1. Press the " " button to enter the recording mode and there will be prompt tone; 2. End recording: press any button to end recording; 3.
Specifications Frequency response: 480Hz -15KHz Audio input: Bluetooth, AUX, USB flash disk, microSD card Troubleshooting No sound from the amplifier • Ensure the amplifier is ON. • Ensure the audio cables are firmly connected and the input is set correctly on the amplifier. • Ensure signal output from the audio source is normal. • Try to turn up the volume of the amplifier or audio source. • Turn the amplifier off and restart it.