Kegerator Conversion Cooler BR3002BL/BR3002SS Fridge for the KC3000 Kegerators Owner’s Manual For more information on other great EdgeStar products on the web, go to https://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar kegerator and/or injury to the user. This kegerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the rating label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety To prevent back and other types of injuries, use at least two people to move and install the kegerator. This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION ........................................................................................................................................I TABLE OF CONTENTS ............................................................................................................................................................. III FIRST TIME OPERATING INSTRUCTIONS .................................................................................................................
First Time Operating Instructions Before use, make sure all packaging labels and materials are all removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you are ever to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Introduction Thank you for purchasing this EdgeStar kegerator. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your kegerator. Following this manual will ensure that your product will work at its peak performance and efficiency.
Parts Identification 2
Accessories Your kegerator will come with a set of standard accessories. These include a drip tray, guard rail, and casters. The other accessories you receive for the dispense kit and CO2 tank will be based upon the type of kegerator you purchase. Standard Accessories: 1 – Drip Tray 1 – Guard Rail 4 – Casters NOTE: The type of kegerator you purchase will determine the type of accessories you will receive for the dispense kit. The most common options include single, dual, and triple taps.
Installing the Kegerator To ensure the kegerator will last, install it in a location where there is proper air circulation and electrical connections. Keep the refrigerator away from heat and direct sunlight. This cooler is designed for indoor use only and should not be used outdoors. It should not be placed in a builtin or recessed area as it is designed to be a freestanding kegerator.
Electrical Requirements ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, electrical shock, or death.
Leveling the Kegerator It is important for the kegerator to be leveled for optimum efficiency. It can be raised or lowered by rotating the two front leveling legs of the cooler. If you find that the surface is not level, rotate the feet until the kegerator becomes level. You may need to make several adjustments to level it. 1. If available, place a carpenter’s level on top of the product to see if the kegerator is level from front to back and side to side. 2.
Using the Temperature Control Panel This kegerator has an electronic control panel located on the top of the exterior of the cabinet. This kegerator has a cooling range of 32-50°F (0-10°C). Press the Cooler or Warmer buttons to adjust temperature by 1°. Press the F/C button to switch between degrees Fahrenheit and Celsius. Press Deep Chill to activate the quick cooling feature of this kegerator. Press the button again to exit Deep Chill mode. Deep Chill should be used to quickly cool a warm kegerator.
Normal Sounds Your new kegerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor or walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the kegerator can also make noises.
CLEANING AND MAINTENANCE A regular cleaning once every two (2) weeks of the faucet, beer hose, and keg coupler is extremely important when the kegerator is used frequently. If this is not performed, the beer will foam. Additionally, bacteria, yeast, mold, and beer stone will build up and quickly degrade the quality of draft beer.
TROUBLESHOOTING Before Calling for Help If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem could be something that can easily be solved or explained. Symptoms The kegerator turns on and off frequently. The kegerator does not turn on. The kegerator does not turn on.
Troubleshooting continued Issue The body of the kegerator is electrified. Frost is forming in the kegerator. The kegerator will not reach the desired temperature The door will not shut properly. Possible cause Solution The unit is not grounded properly. Contact your local electrician to test your electrical grounding system. If frost builds up manual defrosting may be required.
Specifications Description of product Freestanding Kegerator Conversion Cooler Model BR3002BL / SS Fridge for the KC3000 Kegerators Voltage/Frequency AC 115V~60Hz Amperage 0.86A Color Black Cabinet; Black or Stainless Steel Door Storage Capacity Options Refrigerant R600a, 1.27 oz. Dimensions (Height x Width x Depth ) 33 1/2” x 23 5/8” x 23 5/8” Weight 101.4 lbs.
EdgeStar Limited Warranty One (1) Year Parts & Labor This product is warranted by EdgeStar and is subject to any conditions set forth as follows: WHAT IS COVERED: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship.
14
15
16
17
