Assembly instructions ITEM# EM-200 OF-608 ASSEMBLY REQUIREMENT 1 PERSON ASSEMBLY | 30 MINUTES ASSEMBLY TIME {APPROXIMATE} TOOLS REQUIRED: ALLEN WRENCHES {PROVIDED} ASSEMBLY PREPARATION 1. Hover all packaging materials, staples and packing straps from the carton, 2, Refer to Ports Checklist and ensure they are complete before you start assembling. 3. Place all components on a clean, flat and soft surface (e.g. carpal or rug) to prevent parts from getting scratched, TIPS FOR ASSEMBLY 1.
PARTS CHECKLIST mg ® emg 20MM Bolts *4 45MM Bolts ®4 Bolt Caps X4 Cap Covers K8 Casters STEP. Attach the tit mechanism to the seat using screws A hand tightening screws and finishing with Allen Wrench. Please note the orientation of the front of the seat ang the mechanism. STEP 2, Attach the armrests (optional) to the Seat using bolt cops €, Screws B, hand tightening screws and finishing with Allen Wrench.
STEP 3, Cover the holes with cop covers D. STEP 4. insert the casters E into the five star Bose. This may Toke significant force. Gently serous the bus cover and place around the center of the 5 stir Bose. Insert the gos lift into the center of the boss. Remove the small black gos BR cover before assembling the rest of your chain.
STEP 8. Attach the dissembled seat fo the assembled base by aligning the hole in the tilt mechanism (4 the top of the gas lift Push down firmly {0 secure. STEP 6.
Missing something? We work very hard to ship a perfect product but sometimes furniture or hardware go missing of get damaged in transit. Please contact us ond we'll quickly mike ft right. [DO O Need some help? Our support team is here for you. £2 help@polyandoarkcom 5 1(855) 310-1450 { Dpolyandbark.