User's Manual

ManualsBrandsEdgecore Networks ManualsElectronics802.11ac Outdoor 5GHz Access Point

– 1 –

Quick Start Guide

802.11ac Outdoor Stand-Alone/Cloud-Based Access Point

ECWO3300, 4300, 5300 Series

The ECWO3300/4300/5300 Series are a family of single- and dual-band (2.4/5 GHz)

access points (APs) that are housed in a waterproof enclosure for mounting

outdoors. The units include a built-in mounting bracket for attaching to a 1.5 to 6-

inch pole and they can be powered through their Ethernet cable connection from a

power injector module that is installed indoors.

The ECWO3300/4300/5300 Series includes these models:

ECWO3320 — 2.4 GHz stand-alone AP with internal antennas

ECWO3320-L — 2.4 GHz controller-based AP with internal antennas

ECWO3324 — 2.4 GHz stand-alone AP with external antennas

ECWO3324-L — 2.4 GHz controller-based AP with external antennas

ECWO4320 — 5 GHz stand-alone AP with internal antennas

ECWO4320-L — 5 GHz controller-based AP with internal antennas

ECWO4324 — 5 GHz stand-alone AP with external antennas

ECWO4324-L — 5 GHz controller-based AP with external antennas

ECWO5320 — Dual-band stand-alone AP with 5 GHz internal antennas

ECWO5320-L — Dual-band controller-based AP with 5 GHz internal antennas

ECWO5324 — Dual-band stand-alone AP with external antennas

ECWO5324-L — Dual-band controller-based AP with external antennas

Note:

For Safety and Regulatory information, refer to the Safety and Regulatory

Information document included with the AP.

E052014-CS-R01

150200000891A

www.edge-core.com

ECWO3320-C — 2.4 GHz cloud-based AP with internal antennas

ECWO3324-C — 2.4 GHz cloud-based AP with external antennas

ECWO4320-C — 5 GHz cloud-based AP with internal antennas

ECWO4324-C — 5 GHz cloud-based AP with external antennas

ECWO5320-C — Dual-band cloud-based AP with 5 GHz internal antennas

ECWO5324-C — Dual-band cloud-based AP with external antennas

Summary of content (13 pages)

PAGE 1
Quick Star t Guide 802.11ac Outdoor Stand-Alone/Cloud-Based Access Point ECWO3300, 4300, 5300 Series The ECWO3300/4300/5300 Series are a family of single- and dual-band (2.4/5 GHz) access points (APs) that are housed in a waterproof enclosure for mounting outdoors. The units include a built-in mounting bracket for attaching to a 1.5 to 6inch pole and they can be powered through their Ethernet cable connection from a power injector module that is installed indoors.
PAGE 2
S afet y and R egulator y I nformati on 802.11ac Outdoor Stand-Alone/Cloud-Based Access Point ECWO3300, 4300, 5300 Series This document provides information on switch safety, regulatory statements and compliances. It includes these sections: ◆ “Compliances and Safety Statements” on page 1 ◆ “Warnings and Cautionary Messages” on page 7 Compliances and Safety Statements FCC Class B This device complies with Part 15 of the FCC Rules.
PAGE 3
Safety and Regulatory Information This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation within the 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range is restricted to an indoor environment. The 5600-5650MHz band is disabled by software during manufacturing and cannot be changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
PAGE 4
Safety and Regulatory Information 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 20 cm entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant.
PAGE 5
Safety and Regulatory Information Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/ 5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: ◆ EN 60950-1:2006 + A11: 2009 Safety of Information Technology Equipment. ◆ EN 300 328 V1.7.
PAGE 6
Safety and Regulatory Information The Declaration of Conformity (DoC) can be obtained from www.edge-core.com -> support -> download -> declarations & certifications. This equipment may be operated in: Bulgarian Български С настоящето, Edge-Core декларира, че това безжично устройство е в съответствие със съществените изисквания и другите приложими разпоредби на Директива 1999/ 5/EC.
PAGE 7
Safety and Regulatory Information Lithuanian Lietuvių Šiuo Edge-Core deklaruoja, kad šis Radio LAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Maltese Malti Hawnhekk, Edge-Core, jiddikjara li dan Radio LAN device jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
PAGE 8
Safety and Regulatory Information Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards.
PAGE 9
Quick Start Guide Follow the steps in this guide to install the AP in your network. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction.
PAGE 10
Quick Start Guide Attach External Antennas 3 2 1 1 Remove the front port cover by pushing the locking tab up and then sliding the cover off. 2 Connect external antennas to the AP’s 5 GHz RP-SMA connectors using RF coaxial cable provided in the antenna package. 3 Connect external antennas to the AP’s 2.4 GHz RP-SMA connectors using RF coaxial cable provided in the antenna package. Note: The number of available 2.4 GHz or 5 GHz external antenna connectors depends on the specific model. 3.
PAGE 11
Quick Start Guide 3 1 Connect the Ethernet cable from the AP to the “POE” port on the power injector. 2 Connect Ethernet cable from the “LAN” port on the power injector to a LAN switch. 3 Connect the power cord to a nearby AC power source (100-240 VAC, 50/60 Hz). 1 2 Note: Connecting the Ethernet cable from the AP to the injector module powers on the unit. 5. Verify AP Operation Verify basic AP operation by checking the system LEDs.
PAGE 12
Quick Start Guide 6. Connect to the Web The stand-alone APs offer a web-based management interface for the User Interface configuration of all the unit’s features. You can make initial configuration changes by connecting a PC directly to the AP’s ETH1 RJ-45 port. The AP has a default management IP address of 192.168.2.1 and a subnet mask of 255.255.255.0. You must set your PC IP address to be on the same subnet as the AP (that is, the PC and AP addresses must both start 192.168.2.x).
PAGE 13
Quick Start Guide Hardware Specifications Item Specification Chassis Size (H x W x D:) 280.86 x 91.85 x 50.35 mm (11.06 x 3.62 x 1.98 inches) Weight 0.75 kg (1.65 lb) Temperature Operating: -20 °C to 65 °C (-4 °F to 149 °F) Storage: -30 °C to 80 °C (-22 °F to 176 °F) Humidity Operating: 15% to 95% (non-condensing) Waterproof/Dustproof IP55 Network Interfaces Ports ETH0 (PoE) RJ-45 Port: 1000BASE-T, passive PoE ETH1 RJ-45 Port: 100BASE-TX 2.4 GHz Radio IEEE 802.11b/g/n 5 GHz Radio IEEE 802.