User's Manual

ManualsBrandsEdgecore Networks ManualsElectronicsIEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access Point

– 1 –

Quick Start Guide

IEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access Point

ECW7210-L

Note:

For detailed access point (AP) installation information, refer to the

Installation Guide, which is on the Documentation CD included with the AP.

Note:

For Safety and Regulatory information, refer to the Safety and Regulatory

Information document included with the AP.

Installation Information

The AP includes its own built-in features for mounting the unit to a wall or

suspended ceiling T-rail.

Caution:

The planning and installation of the AP requires professional personnel

that are trained in the installation of radio transmitting equipment. The user is

responsible for compliance with local regulations concerning items such as

antenna power, use of lightning arrestors, grounding, and radio mast or tower

construction. Therefore, it is recommended to consult a professional contractor

knowledgeable in local radio regulations prior to equipment installation.

Follow these steps to install the AP:

1. Unpack the AP Unpack the AP and check the package contents.

◆ ECW7210-L Enterprise Access Point

◆ AC Power adapter

◆ Console cable (RJ-45 to DB-9)

◆ Quick Start Guide (this guide)

◆ Regulatory and Safety Information

◆ Screw Kit

150200000848A

E032014-AP-R01

www.edge-core.com

Summary of content (7 pages)

PAGE 1
Quick Star t Guide IEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access Point ECW7210-L Note: For detailed access point (AP) installation information, refer to the Installation Guide, which is on the Documentation CD included with the AP. Note: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP. Installation Information The AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail.
PAGE 2
Quick Start Guide 2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling T-rail. 1 2 .Mounting on a Wall 1 Set two screws in the wall 137.2 mm (5.2 in.) apart. 2 Slide the AP’s wall mounting slots down onto the screws so that the unit is secure. 1 2 .Mounting on a Ceiling T-rail 1 Position the AP’s ceiling-mount clip holders on either side of the T-rail. 2 Turn the AP until the two clips lock the AP to the T-rail.
PAGE 3
Quick Start Guide 3. Connect Cables Connect network cable to the RJ-45 port for your network connection. The RJ-45 port connection can also provide PoE power to the unit. 1 1 Connect Category 5e or better cable to the RJ-45 port. 4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP and to an AC power source. 1 2 1 Connect the power adapter to the power socket. 2 Connect the power adapter to a nearby AC power source.
PAGE 4
Quick Start Guide 5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The Power LED should be on green and the LAN LED on or flashing green. 3 1 2 1 WiFi 2 Power 3 LAN 6. Connect to the To make initial configuration changes to the AP, connect a PC to the AP’s console Console Port port using the included console cable.
PAGE 5
Quick Start Guide 1 Console Port 2 Console Cable From a PC running VT-100 terminal emulator software, use the following settings: ◆ ◆ ◆ ◆ ◆ ◆ Baud rate — 115,200 bps Character Size — 8 Characters Parity — None Stop bit — One Data bits — 8 Flow control — none Log in to the command-line interface (CLI) using default settings: ◆ ◆ Login Name — admin Password — null (there is no default password) 7.
PAGE 6
Quick Start Guide 8. Security Slot The access point includes a Kensington security slot on the rear panel. You can prevent unauthorized removal of the access point by wrapping the Kensington security cable (not provided) around an unmovable object, inserting the lock into the slot, and turning the key.
PAGE 7
Quick Start Guide Hardware Specifications Item Specification Chassis Specifications Size W x D x H: 180 x 160 x 53 mm (7.08 x 6.29 x 2.08 inches) Weight 638 g (1.40 lb) Temperature Operating: 0 °C to 40 °C (32 °F to 104 °F) Storage: -20 °C to 70 °C (-4 °F to 158 °F) Humidity Operating: 5% to 95% (non-condensing) Network Interfaces Ports Two RJ45 1000Base-T: One with PoE (PD) 2.4 GHz Radio IEEE 802.11b/g/n 5 GHz Radio IEEE 802.11a/n/ac Radio Frequencies 2.4 GHz 2400 ~ 2483.