Quick Start Guide

QUICK START GUIDE

What’s Included:

Scout / Remote control / HDMI cable / USB-C Power

supply & cable / 2 AAA batteries (Antenna and coaxial cable not included)

What You’ll Need:

Antenna and coaxial cable / Broadband Internet

access with ethernet connection or Wi-Fi

For information on setting up Scout, watch our video at

Evoca.tv/setup.

PAGE 1
QUICK START GUIDE What’s Included: Scout / Remote control / HDMI cable / USB-C Power supply & cable / 2 AAA batteries (Antenna and coaxial cable not included) What You’ll Need: Antenna and coaxial cable / Broadband Internet access with ethernet connection or Wi-Fi For information on setting up Scout, watch our video at Evoca.tv/setup.
PAGE 2
HOW EVOCA WORKS FIVE EASY STEPS TO CONNECT! STEP 1: Connect STEP 4: Connect your antenna. Find the best location to mount your antenna and connect it to Scout using a coaxial cable. STEP 2: Connect to Internet. STEP 5: Wait Connect Scout to your Internet modem using an ethernet cable. If you plan to use Wi-Fi, reference the Settings menu after you have powered up your television. STEP 3: to power. Connect power supply to Scout using the USB-C cable.
PAGE 3
REMOTE CONTROL NOTE: Remove tab before use. Power Main Menu/Guide Volume Control Select/OK Important Product Information FCC Compliance Information • Model: EvocaScoutV2 This device contains FCC ID: 2AWBYENI-1VA. Playback Control Back Sub-channel Tuning This device must be installed at least 20cm (~8 inches) from typical person locations per FCC RF exposure guidelines. Do not make any modifications to this device, doing so may void your authority to operate it.