Quick Start 1 2 3 4 5 6 Open Caps on the bottom of both of your speakers Turn on the Main Power Switches on both speakers Press the Standby Power Button on top of your speakers to power them on The speakers will automatically pair to each other and announce which speaker is the Left / Right speaker. Search your Bluetooth Connection on your Smart Device. Two ‘ECOXGEAR’ options will be available. Choose either.
Control Buttons & Operations On/Off Press the Standby Power Button once to power ON/OFF. IMPORTANT: Standby Power function will NOT operate when the Master Power is set OFF. Master Power Switch under the cap on the bottom of each speaker must be set ON for Standby & your Marine FX speakers to operate. Bluetooth When turned ON, the Marine FX speakers will power on and search for your Bluetooth. Refer to Set Up Recommendations 1-2-3 part 3 for details.
Set Up Recommendations 1-2-3 1 Charge Your Marine FX speakers Before you power on your Marine FX speakers, connect the USB-C port to the USB cable and a 5V power source to fully charge your Marine FX speakers for best performance. NOTE: Before using your Marine FX speakers for the first time, charge the unit until all battery level indicators are green, indicating a full charge. Approximately 6 hours of charging is required from a low to a full charge.
3 Bluetooth Pairing & Your Audio Connecting With Bluetooth: Connect To Your Smart Device & Play Audio When your speakers are turned on, the blue LED light on the top panel will flash, indicating that they are ready to pair. Turn on Bluetooth on your Bluetooth device (Smart Device) and set the device in pairing mode. Available Bluetooth connections shall appear. Select the ECOXGEAR speaker from the list of discovered devices on your Bluetooth device. Wait for a few seconds until the connection is completed.
RECOMMENDATION: If you are not familiar with Bluetooth pairing for your Smartphone or other Smart Device, refer to the User Guide for your Smartphone to learn how to add and pair a new device (Marine FX speakers for instance) to your Smartphone using Bluetooth.
EcoConnect - Wireless Stereo Connection of Two Speakers If the speakers do not automatically pair when they are first turned on, PRESS & HOLD on each speaker for 5 seconds. Once the speakers emit a tone, follow the Bluetooth Pairing & Audio instructions to connect one Marine FX speaker to your device. Leave this speaker powered on and connected to your device. Next, press the EcoConnect Button on both of your speakers. Both speakers will announce, “EcoConnect, pairing speakers.
Master Power Switch & Connections To access the connections, turn the cap to the LEFT so the cap’s tab lines up with unlocked symbol , on the back of the unit. Use the finger tab to pull open the cap. Select Unlocked Use Tab to Open Cap Access Connections Important: Maintaining Waterproofness If the cap on the back panel is not properly closed, the unit is NOT watertight. To ensure the unit is watertight & waterproof, ALWAYS CLOSE THE CAP PROPERLY.
Connections: Functions Audio AUX-IN Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your Marine FX speakers. NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection. Input Master Power Switch Marine FX speakers have a separate Master Power Switch and a Standby Button. The switch MUST be set to the ON position to power your Marine FX speakers.
Specifications Unit Dimensions 8” 5.6” Unit Weight 39.9 ounces Output Power RMS 30W S/N Ratio 88dB +/- 3dB Power Source 14.8V, 2600mAh Lithium Ion Battery Pack USB Input 5V, 2A Frequency Range 125Hz-18,000Hz Bluetooth Bluetooth® CSR 4.2 Up to 100 ft / 30 m Play Time 10+ hours from full charge at 75% volume level 5” EcoConnect TrueWireless Stereo (TWS) Up to 30 ft / 9.
x2 Marine FX Speakers x2 USB Cables MARINE FX WATERPROOF BLUETOOTH® SPEAKERS Models: GDI-EXYMH2XFX00...
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SAFETY ADVISORY & WARNING: Read and follow all instructions. Use only as intended. CAUTION: Do NOT open to repair. A qualified technician must carry out repair work. ATTENTION: Do NOT charge while the unit is wet. Towel dry the unit AND make sure all connections are dry BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and may void the warranty. PROPOSITION 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.
You should never 1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark. 2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the speakers, housings, or gaskets. In the event of a severe impact to your unit please return the unit to Grace Digital to review for potential damage.
LIMITED MANUFACTURER’S WARRANTY: The Marine FX speakers are covered by a 1-year limited warranty that covers defects in workmanship and / or materials for a period of 1 year from original purchase date with the exception of the unit’s battery. The unit’s battery is covered by a conditional 6-month warranty. This warranty does not apply to any products which have been abused, neglected, modified, or used for a purpose other than the one for which they were manufactured.